User Manual

Level 1 Level 2 Level 3 Descriptions
Emulation
- - Set the printer emulation mode.
Print Options Font List HP LaserJet
Print a list of the machine’s internal fonts.
BR-Script 3
Test Print
- Print a test page.
2-sided
(For automatic 2-sided
printing models)
- - Turn 2-sided printing off or on and select flip on long edge
or short edge.
Auto Continue
- - Select this setting if you want the machine to clear paper
size errors, and to use the paper in the tray.
Tray Command
- - Select this setting if a tray mismatch appears when you use
the HP drivers.
Reset Printer
- - Restore the printer settings to the factory settings.
For the Other models
Level 1
Descriptions
Test Print
Print a test page.
2-sided
(For automatic 2-sided printing
models)
Turn 2-sided printing off or on and select flip on long edge or short edge.
Auto Continue
Select this setting if you want the machine to clear paper size errors, and to use
the paper in the tray.
Reset Printer
Restore the printer settings to the factory settings.
[Network]
For wired and wireless network models
Level 1
Level 2 Level 3 Descriptions
Wired LAN TCP/IP Boot Method
Select the Boot method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
(Up to 32 characters)
WINS Config
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or secondary WINS
server.
DNS Server
Specify the IP address of the primary or secondary DNS
server.
APIPA
Set the machine to allocate the IP address from the link-local
address range automatically.
IPv6
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs & Troubleshooting
page on the Brother support website at support.brother.com.
Ethernet
- Select the Ethernet link mode.
Wired Status
- View the current wired status.
MAC Address
- View the machine's MAC address.
Set to Default
- Restore the wired network settings to the factory settings.
578