User Manual

Table Of Contents
Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(up to 32 characters)
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary
WINS server.
Secondary
Specify the IP address of the secondary
WINS server.
DNS Server Primary
Specify the IP address of the primary
DNS server.
Secondary
Specify the IP address of the secondary
DNS server.
APIPA
- Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6
- Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Setup Wizard
- - Configure your wireless network settings
manually.
WLAN Assistant
- - Configure your wireless network settings
using the Brother installation disc.
WPS
- - Configure your wireless network settings
using the one-button push method.
WPS w/ PIN
Code
- - Configure your wireless network settings
using WPS with a PIN.
WLAN Status Status
- View the current wireless network status.
Signal
- View the current wireless network signal
strength.
SSID
- View the current SSID.
Comm. Mode
- View the current Communication mode.
MAC Address
- - View the machine's MAC address.
Set to Default
- - Restore the wireless network settings to
the factory settings.
WLAN Enable
- - Turn the wireless network connection On.
Wi-Fi
Direct
Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group Owner.
Device
Information
Device Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
594