User Manual

Table Of Contents
Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP
Brother support website at
support.brother.com.
Setup Wizard
- - Configure your wireless network settings
manually.
WLAN Assistant
- - Configure your wireless network settings
using the Brother installation disc.
WPS
- - Configure your wireless network settings
using the one-button push method.
WPS w/ PIN
Code
- - Configure your wireless network settings
using WPS with a PIN.
WLAN Status Status
- View the current wireless network status.
Signal
- View the current wireless network signal
strength.
SSID
- View the current SSID.
Comm. Mode
- View the current Communication mode.
MAC Address
- - View the machine's MAC address.
Set to Default
- - Restore the wireless network settings to
the factory settings.
WLAN Enable
- - Turn the WLAN on or off manually.
Wi-Fi
Direct
Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group Owner.
Device
Information
Device Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
IP Address
- View your machine's current IP Address.
Status
Information
Status
- View the current Wi-Fi Direct network
status.
Signal
- View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a strong
signal.
I/F Enable
- - Turn the Wi-Fi Direct connection on or off.
NFC
(Available only
for certain
models)
- - - Turn the NFC function on or off.
Web Connect
Settings
Proxy Settings Proxy
Connection
- Change the Web connection settings.
Address
-
Port
-
User Name
-
600