User Manual

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Wired LAN TCP/IP WINS Server
Specify the IP address of the primary or secondary WINS
server.
DNS Server
Specify the IP address of the primary or secondary DNS
server.
APIPA
Set the machine to allocate the IP address from the link-local
address range automatically.
IPv6
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs & Troubleshooting
page on the Brother support website at support.brother.com.
Ethernet
- Select the Ethernet link mode.
Wired Status
- View the current wired status.
MAC Address
- View the machine's MAC address.
Set to Default
- Restore the wired network settings to the factory settings.
Wired Enable
- Turn the Wired LAN interface on or off manually.
WLAN TCP/IP Boot Method
Select the Boot method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
(Up to 32 characters)
WINS Config
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or secondary WINS
server.
DNS Server
Specify the IP address of the primary or secondary DNS
server.
APIPA
Set the machine to allocate the IP address from the link-local
address range automatically.
IPv6
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's FAQs & Troubleshooting
page on the Brother support website at support.brother.com.
Setup Wizard
- Configure your wireless network settings manually.
WLAN Assistant
- Configure your wireless network settings using the Brother
installation disc.
WPS
- Configure your wireless network settings using the one-
button push method.
WPS w/PIN Code
- Configure your wireless network settings using WPS with a
PIN.
WLAN Status Status
View the current wireless network status.
Signal
View the current wireless network signal strength.
Channel
View the current wireless network channel.
Speed
View the current wireless network speed.
SSID
View the current SSID.
Comm. Mode
View the current Communication mode.
MAC Address
- View the machine's MAC address.
Set to Default
- Restore the wireless network settings to the factory settings.
WLAN Enable
- Turn the WLAN on or off manually.
600