Product Safety Guide HL-L2310D / HL-L2335D / HL-B2000D / HL-L2350DW / HL-L2351DW / HL-L2370DN / HL-L2375DW / HL-B2080DW / HL-L2376DW / HL-L2385DW / HL-L2386DW / DCP-L2535D / DCP-B7500D / DCP-L2531DW / DCP-L2535DW / DCP-L2550DW / DCP-B7535DW / HL-L2395DW / MFC-L2710DW / MFC-B7715DW / MFC-L2713DW / MFC-L2715DW / MFC-L2716DW / MFC-L2730DW / MFC-L2750DW / MFC-L2751DW / MFC-L2770DW / MFC-L2771DW Brother Industries, Ltd.
Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING Hot Surface icons warn you not to touch product parts that are hot. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and 32°C, the humidity is between 20% and 80%, and where there is no condensation. DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water. Doing so may create the risk of an electrical shock, short circuit, or fire, as water may come into contact with the product (including condensation caused by heating/air conditioning/ventilation equipment).
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. Products without scanning function 100 mm 120 mm 100 mm Products with scanning function 250 mm 100 mm 100 mm • Place the product on a solid level surface.
CAUTION Put your product on a flat, level, stable surface (such as a desk), that is free from vibration and shocks. Put the product near a telephone socket (MFC models only) and a standard grounded electrical socket. DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product.
Connect the Product Safely WARNING ELECTRICAL HAZARDS Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you could create an electrical short, which may create the risk of a fire. There are high-voltage electrodes inside the product.
Unplug the power plug regularly to clean it. Use a dry cloth to clean the root of the plug blades and between the blades. If the power plug is plugged into the socket over a long period, dust accumulates around the plug blades, which may cause a short circuit, resulting in a fire. DO NOT dismantle this product. Dismantling this product could cause a fire or electrical shock. DO NOT attempt to service this product yourself.
If the product has been dropped or the casing has been damaged, there may be the possibility of an electrical shock. Unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer. DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical shock from lightning. DO NOT put toner cartridges or a toner cartridge and drum unit assembly into a fire or places susceptible to fire. It could explode, resulting in injuries.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations. (Models with Wireless LAN function only) DO NOT use the product near any medical electrical equipment.
If the product becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any liquid on it, immediately unplug the product from the electrical socket. Contact Brother customer service or your local Brother dealer. Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the danger of suffocation, keep these bags away from babies and children, and dispose of them properly.
CAUTION When you move the product, carry the product as shown in the illustration. (Products with scanning function only) To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. For your safety, unplug the product from the electrical socket when it is not used for a long time. When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product.
Keep toner cartridges out of the reach of children. If toner powder is swallowed, consult a doctor immediately. We recommend placing the toner cartridge and drum unit assembly on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water. Should you come into contact with toner, follow these instructions: • Inhalation Obtain immediate medical attention.
• DO NOT put objects on top of the product. Doing so may cause the product to malfunction. • If the product does not operate normally when the operating instructions are followed, adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
4. Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never spill liquid of any kind on the product. 5. Unplug this product from the wall outlet and refer servicing to Authorised Service Personnel under the following conditions: • When the power cord is damaged or frayed. • If liquid has been spilled into the product. • If the product has been exposed to rain or water.
• If the product has been exposed to rain or water. • If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. • If the product has been dropped or the casing has been damaged.
any 30 minute period for any single manual call initiation, and (b) The equipment shall go onhook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt. 11. Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device.
Important Information for Some Countries Important Safety Instructions 1. This product is equipped with a grounding type plug, a plug having two or three pins. This plug will fit into only a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounding-type plug. 2. DO NOT place anything on top of the power cord including this product.
• Brother cannot accept any financial or other responsibilities that may be the result of your use of this information, including direct, special, or consequential damages. There are no warranties extended or granted by this document. Product Warranty & Liability Nothing in this guide shall affect any existing product warranty or be construed as granting any additional product warranty. Failure to follow the safety instructions in this guide may invalidate your product’s warranty.
Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. IEC60825-1:2014 Specification (For 220-240V Models Only) This product is a Class 1 laser product as defined in IEC60825-1:2014 specifications. The label shown below is attached in countries where required.
LAN Connection (Models with Wired LAN Function Only) CAUTION DO NOT connect this product to a LAN connection that is subject to over-voltages.
equipment, you must dispose of it separately at an appropriate collection point, and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. For detailed information, please refer to the following Brother India website: https://www.brother.in/ For inquiries on the collection program, please call Toll Free: 1800 222422 or 1800 2098904 (Between 9AM-5PM Mon-Sat).
Trademarks BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance®.
This product includes software developed by the following vendors: ©1983-1998 PACIFIC SOFTWORKS, INC. ALL RIGHTS RESERVED. ©2008 Devicescape Software, Inc. All rights reserved. This product includes the “KASAGO TCP/IP” software developed by ZUKEN ELMIC, Inc. Copyright 1989-2014 Datalight, Inc., All Rights Reserved. FlashFX® Copyright 1998-2014 Datalight, Inc. U.S.Patent Office 5,860,082/6,260,156 Brother Customer Service Customer Service Visit www.brother.
In addition, driving licences and/or Certificates of Title to motor vehicles may not be copied under certain national laws. Copyrighted works cannot be copied lawfully, subject to the “fair dealing” exception relating to sections of a copyrighted work. Multiple copies would indicate improper use. Works of art should be considered the equivalent of copyrighted works.
Month of publication: 02/2019 D011BR001-01 OCE/ASA/SAF/GLF/TWN Version B