User Manual
Table Of Contents
- Product Safety Guide
- Symbols and Conventions Used in the Documentation
- Compilation and Publication Notice
- Choose a Safe Location for Your Product
- Connect the Product Safely
- Use the Product Safely
- Important Information for Australia
- Important Information for New Zealand
- Important Information for Some Countries
- Product Warranty & Liability
- Approval Information (MFC Models Only)
- IEC60825-1:2014 Specification (For 220-240V Models Only)
- Wireless LAN (Models with Wireless LAN Function Only)
- NFC (Models with NFC Function Only)
- LAN Connection (Models with Wired LAN Function Only)
- For WLAN models (Taiwan only)
- Compliance Statement of Wireless equipment (Thailand only)
- Recycling information in accordance with the India E-Waste (Management) Rules
- Recycling Information in Accordance with the WEEE and Battery Directives
- Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan Only)
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Brother Customer Service
- Unlawful Use of Copying Equipment (Products with scanning function only)
If the product becomes unusually hot, releases smoke, generates any strong smells, or if you
accidentally spill any liquid on it, immediately unplug the product from the electrical socket.
Contact Brother customer service or your local Brother dealer.
Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the
danger of suffocation, keep these bags away from babies and children, and dispose of them
properly.
(MFC models only)
Use caution when installing or modifying telephone lines. Never touch telephone wires or
terminals that are not insulated unless the telephone line has been unplugged from the wall
socket.
Never install telephone wiring during a thunderstorm. Never install a telephone wall socket in
a location that is wet or may become wet, for example, near a refrigerator or other appliance
that produces condensation.
Power Cord Safety:
• This product is equipped with an earthed plug. This plug will only fit into an earthed electrical
socket. This is a safety feature. If you are unable to insert the plug into the socket, ask your
electrician to replace your obsolete socket. DO NOT attempt to defeat the purpose of the
earthed plug.
• DO NOT allow anything to rest on the power cord.
• DO NOT place this product where people might step on the cord.
• DO NOT place this product in a position where the cord is stretched or strained, as it may
become worn or frayed.
• DO NOT use the product or handle the cord if the cord has become worn or frayed. If
unplugging your product, DO NOT touch the damaged/frayed part.
• DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the cord
to separate from the plug. Doing this might cause an electrical shock.
• DO NOT use any undesignated cables (or optional devices). Doing so may cause a fire or
injuries. Installation must be performed properly according to the user's guide.
• Brother strongly recommends that you DO NOT use any type of extension cord.
• This product should be positioned so that nothing pinches or constricts the power cord.
• DO NOT use any cable that does not meet the applicable cable specifications described in
the Quick Setup Guide. Doing so may cause a fire or injuries. If the power cord is provided
with this product, use ONLY the provided cord. Installation must be performed correctly as
described in the Quick Setup Guide.
10