Product Safety Guide HL-3160CDW / HL-3190CDW / DCP-9030CDN / MFC-9150CDN / MFC-9350CDW Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Read this guide before attempting to operate the product, or before attempting any maintenance. Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns or suffocation.
Table of Contents Symbols and Conventions Used in the Documentation............................................ 3 Compilation and Publication Notice ............................................................................ 3 Choose a Safe Location for Your Product .................................................................. 4 Connect the Product Safely.......................................................................................... 6 Use the Product Safely .................................
Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING Fire Hazard icons alert you to the possibility of a fire. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. Hot Surface icons warn you not to touch product parts that are hot. Prohibition icons indicate actions that must not be performed.
Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and 32°C, the humidity is between 20% and 80%, and where there is no condensation. To ensure the high print quality, the maximum ambient temperature we recommend is 32°C. The maximum ambient temperature to safely use this machine is 35°C. DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. Products without scanning function 320 mm 150 mm 150 mm 220 mm Products with scanning function 400 mm 150 mm 150 mm 220 mm • Place the product on a solid level surface.
DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product. For the products with scanning functionality, there is an added risk of injury if the scanner glass should break. Avoid placing your product in a busy area.
There are high-voltage electrodes inside the product. Before you access the inside of the product, including for routine maintenance such as cleaning, make sure you have unplugged the telephone line cord first (MFC models only) and then the power cord from the electrical socket, as well as any telephone/RJ-11 (MFC models only) or Ethernet/RJ-45 cables (Network models only) from the product.
DO NOT drop any metallic hardware or any type of liquid on the power plug of the product. It may cause an electrical shock or a fire. If water, other liquids, or metal objects get inside the product, immediately unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer. This product should be connected to an AC power source within the range indicated on the rating label (You can find the rating label on your machine).
FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire. DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead, use only a dry, lint-free cloth. For instructions on how to clean the product, see the Online User's Guide. DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside the product.
For users with pacemakers: This product generates a weak magnetic field. If you feel anything wrong with the operation of your pacemaker when near the product, move away from the product and consult a doctor immediately. DO NOT place metal objects, such as clips, staples, or jewellery on the product. If these objects contact the electrical parts inside the product, it may cause a fire or electrical shock. DO NOT place a container holding water or liquid on the product.
(MFC models only) Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged from the wall socket. Never install telephone wiring during a thunderstorm. Never install a telephone wall socket in a location that is wet or may become wet, for example, near a refrigerator or other appliance that produces condensation. Power Cord Safety: • This product is equipped with an earthed plug.
(DCP-9030CDN/MFC-9150CDN/MFC-9350CDW) To prevent possible injuries, at least two people should lift the product by holding it from the front and back.
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. HL-3190CDW For your safety, unplug the product from the electrical socket when it is not used for a long time.
When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product. Some products and/or their cartons contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you ingest it, seek medical attention immediately. DO NOT attempt to dismantle the toner cartridge. If toner powder should leak out, avoid inhaling it or letting it come in contact with your skin.
• We recommend that you use our genuine toner cartridges to replace cartridges that come with the device. Non-genuine toner cartridges may cause damage to the machine. They may also result in differences in the colours or storage stability. (Not all non-genuine toner cartridges cause these issues.) • DO NOT remove or damage any of the caution or warning labels inside the product. • DO NOT put objects on top of the product. Doing so may cause the product to malfunction.
• If the product has been spilled by liquid. • If the product has been exposed to rain or water. • If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. • If the product has been dropped or the casing has been damaged.
DO NOT use this product to report a gas leak in the vicinity of the leak. Only use the power cord supplied with this product (if included in the box). Disconnect device This product must be installed near an electrical socket that is easily accessible. In case of an emergency, you must unplug the power cord from the electrical socket to shut off the power completely.
2. DO NOT, without appropriate permission, attempt to alter the emission frequency or increase the emission power (including by installing an additional RF power amplifier), or connect any external antenna or use any unspecified transmitting antenna. 3. This equipment must not cause harmful interference to other radio services. In case such interference occurred, the equipment must be stopped immediately and cannot be used until the appropriate measures are taken to eliminate the harmful interference. 4.
Reliance™ is a trademark of Datalight, Inc. Reliance Nitro™ is a trademark of Datalight, Inc. Datalight® is a registered trademark of Datalight, Inc. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies. Open Source Licensing Remarks This product includes open-source software.
• Postage stamps (cancelled or uncancelled) • Immigration papers • Welfare documents • Cheques or drafts drawn by governmental agencies • Identifying badges or insignias In addition, driving licences and/or Certificates of Title to motor vehicles may not be copied or scanned under certain national laws. Copyrighted works cannot be copied or scanned lawfully, subject to the “fair dealing” exception relating to sections of a copyrighted work. Multiple copies would indicate improper use.
Month of publication: 08/2018 CHN-ENG Version 0
