User Manual

Table Of Contents
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the
Remote Codes
Use the Remote Codes
Related Models: MFC-L3710CW/MFC-L3730CDN/MFC-L3750CDW/MFC-L3770CDW
Remote Activation Code
If you answer a fax call on an extension or external telephone, you can tell your machine to receive it by pressing
the Remote Activation Code *51. Wait for the chirping sounds, and then replace the handset.
If you answer a fax call at the external telephone, you can make the machine receive the fax by pressing the
buttons in the following table:
Applicable Models
To make the machine receive the fax
MFC-L3710CW/MFC-L3730CDN/MFC-L3750CDW/
MFC-L3770CDW
Fax Start and then Receive
Remote Deactivation Code
If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T ring (fast double-ring) after
the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T ring off by pressing
#51 (make sure you press this between the rings).
If the machine answers a voice call and fast double-rings for you to take over, you can take the call at the
external telephone by pressing the button in the following table:
Applicable Models
To pick up voice call
MFC-L3710CW/MFC-L3730CDN/MFC-L3750CDW/
MFC-L3770CDW
Pickup
Related Information
External and Extension Telephones
Change the Remote Codes
259