User Manual

Table Of Contents
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper
Tray > Change Machine Settings to Print on Preprinted Paper in the Paper Tray
Change Machine Settings to Print on Preprinted Paper in the Paper Tray
Related Models: DCP-L3510CDW/DCP-L3517CDW/DCP-L3550CDW/MFC-L3730CDN/MFC-L3750CDW/
MFC-L3770CDW
When you use preprinted paper for 2-sided printing, change the machine's settings.
DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause
the paper to jam or misfeed.
Orientation
For 1-sided printing:
face down
top edge towards the front of the paper tray
For automatic 2-sided printing (long edge binding):
face up
bottom edge towards the front of the paper tray
>> DCP-L3510CDW/DCP-L3517CDW
>> DCP-L3550CDW/MFC-L3730CDN/MFC-L3750CDW/MFC-L3770CDW
DCP-L3510CDW/DCP-L3517CDW
1. Press Menu.
2. Press a or b to select the following:
a. Select [Printer]. Press OK.
b. Select [2-sided]. Press OK.
c. Select [Single Image]. Press OK.
d. Select [2-sided Feed]. Press OK.
3. Press Stop/Exit.
DCP-L3550CDW/MFC-L3730CDN/MFC-L3750CDW/MFC-L3770CDW
1. Press
[Settings] > [All Settings] > [Printer] > [2-sided] > [Single Image] > [2-
sided Feed].
2. Press
.
Related Information
Load Paper in the Paper Tray
27