User Manual

Table Of Contents
Error Message Cause Action
Jam MP Tray
The paper is jammed in the MP
tray.
Gently remove the jammed paper from in and
around the MP tray. Press Retry.
Jam Rear
The paper is jammed in the
back of the machine.
Open the fuser cover and gently remove the
jammed paper. Close the fuser cover. If the error
message remains, press Retry.
Jam Tray 1
The paper is jammed in the
indicated paper tray.
Pull out the paper tray and remove all jammed
paper as shown in the animation on the LCD.
Limit Exceeded
The print limit set in Secure
Function Lock 3.0 was reached.
Ask your administrator to check your Secure
Function Lock Settings.
Manual Feed
Manual was selected as the
paper source in the printer
driver, but there is no paper in
the manual feed slot.
Place paper in the manual feed slot.
Media Type Mismatch
The media type specified in the
printer driver differs from the
paper type specified in the
machine's menu.
Load the correct type of paper in the tray, and
then select the correct media type in the Paper
Type setting on the machine.
No Belt Unit
The belt unit is not installed or
not installed correctly.
Reinstall the belt unit.
No HUB Support
A USB hub device is connected
to the USB direct interface.
Disconnect the USB hub device from the USB
direct interface.
No Drum Unit
The drum unit is not installed
correctly.
Reinstall the toner cartridge and drum unit
assembly for the colour indicated on the LCD.
No Paper
The machine is out of paper, or
paper is not loaded correctly in
the paper tray.
Refill paper in the paper tray. Make sure the
paper guides are set to the correct size.
If paper is in the tray, remove it and load it
again. Make sure the paper guides are set to
the correct size.
Do not overfill the paper tray.
No Paper MP
The MP tray is out of paper, or
paper is not loaded correctly in
the MP tray.
Do one of the following:
Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
If paper is in the tray, remove it and load it
again. Make sure the paper guides are set to
the correct size.
No Paper T1
The paper tray is out of paper,
or paper is not loaded correctly
in the paper tray.
Do one of the following:
Refill paper in the paper tray indicated on the
LCD. Make sure the paper guides are set to
the correct size.
If paper is in the tray, remove it and load it
again. Make sure the paper guides are set to
the correct size.
Do not overfill the paper tray.
No Toner
The toner cartridge or the toner
cartridge and drum unit
assembly is not installed
correctly.
Remove the toner cartridge and drum unit
assembly. Remove the toner cartridge from the
drum unit, and reinstall the toner cartridge back
into the drum unit. Reinstall the toner cartridge
and drum unit assembly back in the machine. If
the problem continues, replace the toner
cartridge.
No Tray T1
The paper tray is not installed
or not installed correctly.
Reinstall the paper tray indicated on the LCD.
469