User Manual

Level 1 Level 2 Level 3 Descriptions
Quality
- - Select the print quality.
Print Options Font List HP LaserJet
Print a list of the machine’s internal fonts.
BR-Script 3
Test Print
- Print a test page.
2-sided 2-sided Print
- Turn 2-sided printing off or on and select flip on long
edge or short edge.
Single Image
- For a print job where the last page is a 1-sided image,
select the 1-sided Feed option to reduce printing time.
Auto Continue
- - Select this setting if you want the machine to clear paper
size errors, and to use the paper in the tray.
Output Colour
- - Set the output colour.
Tray Command
- - Select this setting if a tray mismatch appears when you
use the HP drivers.
Reset Printer
- - Restore the printer settings to the factory settings.
Clr Correction Calibration Calibrate
Initiate colour calibration to check and correct colours.
Reset
Reset the calibration parameters to the default settings.
Registration
- Align the print position of each colour.
Auto Correct
- Set the machine to perform Colour Calibration and
Registration automatically.
ColourSettings Setting Mode
Select whether to apply the colour print settings of the
machine or the printer driver.
Colour Mode
Select the colour mode.
Improve Gray
Turn on or off to improve the image quality of shaded
areas.
Enhance Black
Turn on or off if a black graphic does not print correctly.
Brightness
Adjust the brightness.
Contrast
Adjust the contrast.
Red
Adjust the red colour.
Green
Adjust the green colour.
Blue
Adjust the blue colour.
[Network]
For wired and wireless network models
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP Boot Method
- Select the Boot method that best suits your
needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(Up to 32 characters)
WINS Config
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary WINS
server.
602