User Manual

Table Of Contents
Level 3 Level 4 Level 5 Level 6 Descriptions
Wired LAN Wired Status
- - View the current wired status.
MAC Address
- - View the machine's MAC address.
Set to Default
- - Restore the wired network settings to
the factory settings.
Wired Enable
- - Turn the Wired LAN interface on or
off manually.
WLAN TCP/IP BOOT Method IP Boot
Tries
Select the Boot method that best
suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(up to 32 characters)
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary
WINS server.
Secondary
Specify the IP address of the
secondary WINS server.
DNS Server Primary
Specify the IP address of the primary
DNS server.
Secondary
Specify the IP address of the
secondary DNS server.
APIPA
- Set the machine to allocate the IP
address from the link-local address
range automatically.
IPv6
- Turn the IPv6 protocol on or off.
Setup Wizard
- - Configure the wireless network
settings using the setup wizard.
WLAN Assistant
- - Configure your wireless network
settings using the Brother installation
disc.
WPS
- - Configure your wireless network
settings using the one-button push
method.
WPS w/ PIN Code
- - Configure your wireless network
settings using WPS with a PIN.
WLAN Status Status
- View the current wireless network
status.
Signal
- View the current wireless network
signal strength.
SSID
- View the current SSID.
Comm. Mode
- View the current Communication
mode.
MAC Address
- - View the machine's MAC address.
Set to Default
- - Restore the wireless network settings
to the factory settings.
WLAN Enable
- - Turns the wireless interface on or off.
620