User Manual

Level 3 Level 4 Level 5 Level 6 Descriptions
Options Coverpage Setup Coverpage
Note
Set the machine to automatically send a pre-
programmed cover page.
-
Total Pages
-
Overseas Mode
- - Set to On if you have difficulty sending faxes
overseas.
Set New Default
- - Save your settings as the default.
Factory Reset
- - Restore all settings back to the factory
settings.
Save as
Shortcut
- - - Save the current settings as a shortcut.
[Fax] (When Fax Preview is On)
Level 3
Level 4 Level 5 Descriptions
Sending
Faxes
Redial / Pause - Redial the last number called. When you are entering a fax or
telephone number on the control panel, Redial changes to
Pause on the LCD. Press Pause when you need a delay while
dialling numbers, such as access codes and credit card
numbers. You can also store a pause when you set up
addresses.
Tel / R - Tel changes to R when PBX is selected as the telephone line
type. You can use R to gain access to an outside line or to
transfer a call to another extension when connected to a PBX.
Address Book
- Select the address of the recipient from the address book.
Call History
- Select a number from the Outgoing Call history and then send
a fax to it, add it to the Address Book, or delete it.
Fax Start
- Send a fax.
Options
- Select your settings.
Save as
Shortcut
- Save the current settings as a shortcut.
Received
Faxes
Print/Delete Print
All(New
Faxes)
Print the new received faxes.
Print
All(Old
Faxes)
Print the old received faxes.
Delete
All(New
Faxes)
Delete the new received faxes.
Delete
All(Old
Faxes)
Delete the old received faxes.
Address Book
- - Select the address of the recipient from the address book.
Call History
- - Select a number from the Outgoing Call history and then send
a fax to it, add it to the Address Book, or delete it.
[Copy]
Level 3
Level 4 Level 5 Descriptions
Mono Start
- - Make a monochrome or greyscale copy.
626