Basic User's Guide
Table Of Contents
- Basic User's Guide DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW
- Brother Numbers
- Ordering Accessories and Supplies
- Order Information
- Notice - Disclaimer of Warranties (USA and Canada)
- For the Latest Driver Updates
- User's Guides and Where to Find Them
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- Compilation and Publication Notice
- Important Note
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Troubleshooting
- B Appendix
- C Index
3
Fan the stack of paper to prevent further
jams, and slide the paper guides to fit
the paper size.
4
Make sure the paper is below the
maximum paper mark (b b b).
5
Put the paper tray firmly back in the
machine.
Paper is Jammed in the Back of the
Machine
If the machine's control panel or the Status
Monitor indicates that there is a jam in the
back (Rear) of the machine, follow these
steps:
1
Leave the machine turned on for 10
minutes for the internal fan to cool the
extremely hot parts inside the machine.
2
Open the back cover.
3
Pull the green levers at the left and right
sides toward you to release the fuser
cover.
58