User Manual
Table Of Contents
- Product Safety Guide
- How to use this guide:
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your product
- General precautions
- Connecting the product safely
- Important Safety Instructions
- Servicing the product
- Product Warranty & Liability
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Unlawful use of copying equipment (MFC only)
7
DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside
the product. Prolonged contact of paper with the fuser unit may cause a fire.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this may cause the toner dust
to ignite inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with
a dry, lint-free soft cloth and dispose of it according to local regulations.
Unplug this product from the wall socket before cleaning the product and the scanner glass
(MFC only). DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for cleaning.
HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely hot.
Wait at least 10 minutes for the product to cool down before you touch the internal parts of the
product.