Basic User's Guide
Table Of Contents
- Basic User's Guide DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW
- Brother Numbers
- Ordering Accessories and Supplies
- Order Information
- Notice - Disclaimer of Warranties (USA and Canada)
- For the Latest Driver Updates
- User's Guides and Where to Find Them
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- Compilation and Publication Notice
- Important Note
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Troubleshooting
- B Appendix
- C Index
WARNING
HOT SURFACE
The machine's internal parts will be extremely
hot. Wait for the machine to cool down before
touching them.
4
Use both hands to gently pull the
jammed paper out of the fuser unit.
5
Close the fuser cover.
6
Close the back cover until it locks in the
closed position.
Paper is Jammed inside the
Machine
If the machine's control panel or the Status
Monitor indicates that there is a jam inside the
machine, follow these steps:
1
Leave the machine turned on for 10
minutes for the internal fan to cool the
extremely hot parts inside the machine.
2
Open the front cover.
3
Remove the toner cartridge and drum
unit assembly.
A
Troubleshooting
59