Operation Manual

For automatic 2-sided printing (long
edge binding)
• face up
• bottom edge toward the front of the
paper tray
• DO NOT load different sizes and types
of paper in the paper tray at the same
time. Doing this may cause the paper
to jam or misfeed.
• When you use Letterhead or
Preprinted paper for 2-sided printing,
change the machine's setting by
completing the following step:
• Press [Settings] > [All
Settings] > [Printer] > [2-
sided] > [Single Image] >
[2-sided Feed].
5
Make sure the paper is below the
maximum paper mark (b b b).
Overfilling the paper tray will cause
paper jams.
6
Slowly push the paper tray completely
into the machine.
7
Lift the support flap to prevent paper
from sliding off the output tray.
2
Paper Handling
9