User Manual

3
DO NOT place the product near chemicals or in a place where chemicals could be spilled on it.
Should chemicals come into contact with the product, there may be a risk of fire or electric
shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,
or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or
electric shock. These or other chemicals may also cause the product to malfunction or become
discolored.
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.
These slots and openings are provided for ventilation. Blocking the product’s ventilation could
create a risk of overheating and/or fire.
Instead:
• Keep a minimum gap around the product as shown in the illustration.
(HL only)
(MFC and DCP only)
• Place the product on a solid level surface.
• DO NOT place this product near or over a radiator or heater.
• DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.
5.9 in.
(150 mm)
5.9 in.
(150 mm)
5.9 in.
(150 mm)
5.9 in. (150 mm)
5.9 in.
(150 mm)
5.9 in.
(150 mm)
5.9 in.
(150 mm)
11.8 in. (300 mm)