User Manual
Table Of Contents
- Product Safety Guide
- Using the Documentation
- Compilation and Publication
- Choosing a location
- To use the product safely
- Regulation
- Standard telephone and FCC notices (MFC only)
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- RF Exposure Notice (USA or Canada only) (Wireless models only)
- Wireless connection (Mexico only)
- Industry Canada Compliance Statement (Canada only)
- EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) (MFC only)
- Laser safety (For 110-120V Models Only)
- FDA regulations (For 110-120V Models Only)
- For products sold in the USA or Canada only
- LAN connection (Network models only)
- International ENERGY STAR® Qualification Statement (USA and Canada only)
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Legal limitations for copying (MFC and DCP only)
5
CAUTION
DO NOT place any objects around the product. Such objects block the access to the power
outlet in case of emergency. It is important that the product can be unplugged whenever
needed.
The product may generate odorous gas such as ozone if used for a large volume of printing or
used in a poorly ventilated room for multiple hours. In addition, the product emits some chemical
substances during the printing. Ensure adequate ventilation for the product to avoid injury or
discomfort.
Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the
product is in a safe location where it cannot be accidentally knocked over, which could cause
injury to you or others and serious damage to the product. Also ensure that cords are secured
so as not to pose a tripping hazard.
Some products contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you
ingest it, seek medical attention immediately.
DO NOT place heavy objects on the product.
Put your product on a flat, level, stable surface (such as a desk), that is free from vibration and
shocks. Put the product near a telephone wall jack (MFC only) and a standard grounded AC
power outlet.
Avoid touching metal parts of the product when multiple devices are plugged into a computer
using USB cables.