User Manual
Table Of Contents
- Product Safety Guide
- How to use this guide:
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your product
- General precautions
- Connecting the product safely
- Servicing the product
- Product Warranty & Liability
- Disconnect device
- Approval Information (MFC only)
- Declaration of Conformity (Europe only)
- Declaration of Conformity for R&TTE (Radio and Telecommunications) Directive 1999/5/EC (Europe only) (Applicable to models with telecommunications and/or radio interfaces)
- IEC60825-1:2014 Specification (For 220-240V Models Only)
- Wireless LAN (Models with Wireless LAN function only)
- NFC (Models with NFC function only)
- LAN connection (Network models only)
- Radio interference
- Recycling information in accordance with the WEEE and Battery Directives
- Imaging Equipment Voluntary Agreement
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Brother Customer Service
- Unlawful use of copying equipment (MFC and DCP only)
12
Connecting the product safely A
WARNING
There are high voltage electrodes inside the product. Before you clean the inside of the product,
make sure you have unplugged the telephone line cord first (MFC only) and then the power cord
from the electrical socket. Doing this will prevent an electrical shock.
DO NOT use the AC power cord to pull or push the plug into the wall socket, use the finger grips
on the plug.
DO NOT handle the plug with wet hands. Doing this may cause an electrical shock.
Always make sure the plug is fully inserted.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are unsure, contact a
qualified electrician.
This product is equipped with a 3-wire earthed plug. This plug will only fit into an earthed power
socket. This is a safety feature. If you are unable to insert the plug into the socket, call your
electrician to replace your incompatible socket. DO NOT defeat the purpose of the earthed plug.