Remote Connect User's Guide

3
How to Use Remote Connect
Activate Remote Connect
To activate Remote Connect on your Brother machine, use Web Based Management to set Remote Connect
to ON.
Before using Remote Connect:
- The Remote Connect license must be activated on the target machine. For more information, contact:
- In the US: Brother Customer Support.
- In all other regions: your local Brother office.
- Your Brother machine must be connected to a network and accessible from a web browser.
- Your Network Administrator must authorize your mobile device.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address” is your
Brother machine's IP address).
For example:
http://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
4. Click the Administrator tab.
5. Click the Remote User Interface menu.
6. In the Remote User Interface field, select Remote Connect (End users).
7. Click Submit.
When Remote Connect is ON, a QR code replaces the machine’s usual touchscreen menu.
To close the QR code screen and use the machine normally, press Exit.
The QR code screen returns after the machine completes the operation or the control panel is idle
for one minute.
To remove the QR code screen completely, turn Remote Connect OFF in Web Based
Management.