User Manual

90
m When you replace the drum unit with a
new one, you must reset the drum
counter. Instructions of how to do this
can be found in the box your new drum
unit came in.
Replacing the belt unit A
Model name: BU-320CL
A new belt unit can print approximately
50,000 (5 pages per job) A4 or Letter size
single-sided pages.
1
1
Belt unit life is approximate and may vary by type of
use.
Belt End Soon A
If the Touchscreen displays Belt End
Soon, it means the belt unit is near the end of
its life. Buy a new belt unit and have it ready
before you get a Replace Belt message.
To replace the belt unit, see Replacing the
belt unit on page 90.
Replace Belt A
When the Replace Belt message appears
on the Touchscreen, you must replace the
belt unit.
When you replace the belt unit with a new
one, you must reset the belt unit counter.
Instructions of how to do this can be found in
the box your new belt unit came in.
IMPORTANT
• DO NOT touch the surface of the belt unit.
If
you touch it, it could decrease
print
qu
ality.
• Damage caused by incorrect handling
of
the
belt unit may void your warranty.
Replacing the belt unit A
a Make sure the machine is turned on.