User Manual
Table Of Contents
- Basic User’s Guide MFC-L8600CDW/MFC-L8850CDW/MFC-L9550CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General information
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Accessing the Advanced User's Guide, and Software and Network User's Guide
- How to access the User’s Guides for Advanced Features
- Accessing Brother Support (Windows®)
- Accessing Brother Support (Macintosh)
- Control panel overview
- Shortcut Settings
- Set the date and time
- Enter personal information (Station ID)
- Volume settings
- 2 Loading paper
- Loading paper and print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Using PC-FAX
- 7 Telephone and external devices
- 8 Dialling and storing numbers
- 9 Making copies
- 10 Printing from a USB flash drive or digital camera supporting mass storage
- 11 How to print from a computer
- 12 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
Routine maintenance
119
A
e Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) on the paper tray to
remove dust.
f Wipe the two pick-up rollers (1) inside
the machine to remove dust.
g Reload the paper and put the paper tray
firmly back in the machine.
h Turn on the machine.
Colour Calibration A
The output density for each colour may vary
depending on the machine’s environment,
such as temperature and humidity.
Calibration helps you to improve the colour
density.
a Press .
b Press Calibration.
c Press Calibrate.
d Press Yes to confirm.
e The machine will display Completed.
f Press .
You can reset the calibration parameters
back to the factory settings.
a Press .
b Press Calibration.
c Press Reset.
d Press Yes to confirm.
e The machine will display Completed.
f Press .
1
1