User Manual
Table Of Contents
- Basic User’s Guide MFC-L8600CDW/MFC-L8850CDW/MFC-L9550CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General information
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Accessing the Advanced User's Guide, and Software and Network User's Guide
- How to access the User’s Guides for Advanced Features
- Accessing Brother Support (Windows®)
- Accessing Brother Support (Macintosh)
- Control panel overview
- Shortcut Settings
- Set the date and time
- Enter personal information (Station ID)
- Volume settings
- 2 Loading paper
- Loading paper and print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Using PC-FAX
- 7 Telephone and external devices
- 8 Dialling and storing numbers
- 9 Making copies
- 10 Printing from a USB flash drive or digital camera supporting mass storage
- 11 How to print from a computer
- 12 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
Chapter B
126
Jam Inside The paper is jammed inside the
machine.
See Paper is jammed inside the machine
on page 139.
Jam MP Tray The paper is jammed in the
multi-purpose tray of the
machine.
See Paper is jammed in the multi-purpose tray
on page 135.
Jam Rear The paper is jammed in the
back of the machine.
See Paper is jammed at the back of the
machine on page 137.
Jam Tray1
Jam Tray2
The paper is jammed in the
paper tray of the machine.
See Paper is jammed in the Paper Tray 1 or
Tray 2 on page 136.
Limit Exceeded The number of pages you are
allowed to print has been
exceeded. The print job will be
cancelled.
Contact your administrator to check your
Secure Function Lock Settings.
Log Access Error The machine could not access
the print log file in the server.
Contact your administrator to check the Store
Print Log to Network settings.
For more information, see Software and
Network User's Guide.
No Belt Unit The belt unit is not installed
correctly.
Reinstall the belt unit, (see the steps in
Replacing the belt unit on page 90).
No Drum Unit The drum unit is not installed
correctly.
Reinstall the drum unit, (see the steps
in Replacing the drum unit on page 84.)
No HUB Support A USB hub device is
connected to the USB direct
interface.
Disconnect the USB hub device from the USB
direct interface.
No Paper The machine is out of paper in
the paper tray, or paper is not
correctly loaded in the paper
tray.
Do one of the following:
Refill paper in the paper tray. Make sure the
paper guides are set to the correct size.
Remove the paper and load it again. Make
sure the paper guides are set to the correct
size.
If the problem is not resolved, the paper
pick-up roller may need to be cleaned.
Clean the paper pick-up roller.
(See Cleaning the paper pick-up rollers
on page 118)
No Permission Printing colour documents is
restricted by Secure Function
Lock. The print job will be
cancelled.
Contact your administrator to check your
Secure Function Lock Settings.
No Response/Busy The number you dialled does
not answer or is busy.
Verify the number and try again.
Error Message Cause Action