User Manual

Chapter 7
58
Turning on the Remote Codes 7
You must turn the Remote Codes setting to
On to use the Remote Activation Code and
Remote Deactivation Code.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Remote Codes.
h Press Remote Codes.
i Press Remote Codes.
j Press On.
k If you do not want to change the Remote
Activation Code, press on the
Touchscreen.
l Press .
Changing the Remote Codes 7
The preset Remote Activation Code is l51.
The preset Remote Deactivation Code is #51.
If you are always disconnected when
accessing your External TAD, try changing
the three-digit remote codes, for example ###
and 555.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Remote Codes.
h Press Remote Codes.
i Do one of the following:
 If you want to change the
Remote Activation Code, press
Act.Code. Enter the new code, and
then press OK.
 If you want to change the
Remote Deactivation Code, press
Deact.Code. Enter the new code,
and then press OK.
 If you do not want to change the
Codes, go to step j.
 If you want to turn the Remote Codes
On or Off, press Remote Codes.
Press On or Off.
j Press .