User Manual
Table Of Contents
- Basic User’s Guide MFC-L8600CDW/MFC-L8850CDW/MFC-L9550CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General information
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Accessing the Advanced User's Guide, and Software and Network User's Guide
- How to access Guides for Advanced Features
- Accessing Brother Support (Windows®)
- Accessing Brother Support (Macintosh)
- Control panel overview
- Shortcut Settings
- Set your Station ID
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Using PC-FAX
- 7 Telephone services and external devices
- 8 Dialing and storing numbers
- 9 Making copies
- 10 Printing from a USB flash drive or digital camera supporting mass storage
- 11 How to print from a computer
- 12 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- E Appendix
- Index
Loading paper
25
2
Printing on thick paper, labels and
envelopes from the MP tray
2
When the back cover (face-up output tray) is
pulled down, the machine has a straight
paper path from the MP tray through to the
back of the machine. Use this paper feed and
output method when you want to print on thick
paper, labels or envelopes. (For the
recommended paper to use, see Acceptable
paper and other print media on page 32 and
Envelopes on page 35.)
Before loading, press the corners and sides
of the envelopes to make them as flat as
possible.
a Open the back cover (face-up output
tray).
b (For printing envelopes only)
Pull down the two gray levers, one on
the left side and one on the right side,
toward you as shown in the illustration
below.
c Open the MP tray and lower it gently.