User Manual

56
8
How to dial 8
You can dial in any of the following ways.
Manual dialing 8
a Load your document.
b Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and Sending
Fax(es).
c Press all digits of the fax number.
d Press Fax Start.
Dialing from the Address
Book 8
a Load your document.
b Press (Fax).
c Press Address Book.
d Do one of the following:
 Swipe up or down, or press a or b to
display the number you want.
 Press , and then enter the first
letter of the name and press OK.
e Press the number or the name you want.
f To send a fax, press Apply.
g Press Fax Start.
The machine scans and sends the fax.
LDAP search 8
If the machine is connected to your LDAP
server, you can search for information such
as fax numbers and E-mail addresses from
your server. (See Software and Network
User's Guide)
Fax redial 8
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
The automatic redial only works when you set
Auto Redial to On. The default setting is
On.
If you are sending a fax manually and the line
is busy, press Hook and then Redial, wait
for the other fax machine to answer, and then
press Fax Start to try again. If you want to
make a second call to the last number dialed,
you can save time by pressing Redial and
Fax Start.
Redial only works if you dialed from the
machine.
Dialing and storing numbers 8