User Manual
Table Of Contents
- Basic User’s Guide MFC-L8650CDW/MFC-L8850CDW/MFC-L9550CDW
- User’s Guides and where do I find them?
- Table of Contents
- 1 General information
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Accessing the Advanced User's Guide, and Software and Network User's Guide
- How to access the User’s Guides for Advanced Features
- Accessing Brother Support (Windows®)
- Accessing Brother Support (Macintosh)
- Control panel overview
- Shortcut Settings
- Set the date and time
- Enter personal information (Station ID)
- Volume settings
- 2 Loading paper
- Loading paper and print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Using PC-FAX
- 7 Telephone and external devices
- 8 Dialling and storing numbers
- 9 Making copies
- 10 Printing from a USB flash drive or digital camera supporting mass storage
- 11 How to print from a computer
- 12 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Settings and features tables
- D Specifications
- Index
116
r Once the drum has been selected, place
one hand on the drum gear and at the
other end of that drum place your other
hand on the edge, then rotate the drum
slowly towards you while looking at the
surface of the suspected area.
IMPORTANT
• To avoid print quality problems, DO NOT
touch the surface of the drum unit with
your bare hands.
• DO NOT clean the surface of the
photosensitive drum with a sharp object or
any liquids.
s When you have found the mark on the
drum that matches the drum dot check
sheet, wipe the surface of the drum
gently with a cotton swab until the mark
on the surface comes off.
IMPORTANT
DO NOT clean the surface of the
photosensitive drum with a sharp object or
any liquids.