User Manual

Chapter 1
6
Dial Prefix
(MFC models only) 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.
Setting up the prefix number 1
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Swipe up or down, or press a or b to
display Dial Prefix.
f Press Dial Prefix.
g Press On (or Off).
h Press Dial Prefix.
i Enter the prefix number (up to 5 digits)
using the Touchscreen's keyboard.
Press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j Press .
Changing the prefix number 1
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Swipe up or down, or press a or b to
display Dial Prefix.
f Press Dial Prefix.
g Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
h Press Dial Prefix.
i Do one of the following using the
Touchscreen's keyboard.
 To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button . Then press
the correct digit.
Repeat until the prefix number is
correct, and then press OK.
 To exit without making a change,
press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j Press .