User Manual
1
2
3
4
1
2
3
Product Safety Guide
Telephone Line Cord
For MFC models
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord
Quick Setup Guide
Basic User’s Guide
For MFC models
CD-ROM
Belt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug •
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
MFC-L8850CDW.
You must purchase the correct interface cable for the interface you •
want to use:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
After turning on the machine, the Touchscreen displays the list of countries you can select.
1.
Swipe up or down, or press a or b to display your country, and press your country.
Press OK.
The Touchscreen prompts you to conrm your selection.
2.
If the Touchscreen shows the correct country, press Yes.
—OR—
Press No to go back to step 1 to choose the country again.
1
Remove the packing material from the machine
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
4
Select your country (for MFC models)
Quick Setup Guide
DCP-L8400CDN / DCP-L8450CDW
MFC-L8600CDW / MFC-L8650CDW
MFC-L8850CDW / MFC-L9550CDW
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version 0
SAF/GLF