User Manual

1
2
3
4
1
2
3
Product Safety Guide
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord
Quick Setup Guide
Basic User’s Guide
For MFC models
CD-ROM
Belt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The illustrations in this Quick Setup Guide are based on the •
MFC-L8650CDW.
For a network connection you will need to purchase a network •
interface cable. Please use the supplied USB cable for a USB
connection.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1
Remove the packing material from the machine
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
4
Select your language (if needed)
Telephone Line Cord
For MFC models
USB Interface Cable
Press
1.
> All Settings > Initial Setup > Local Language
Press your language.
2.
Press
3.
.
Quick Setup Guide
DCP-L8400CDN / MFC-L8650CDW
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Version 0
CHN-ENG