Basic User's Guide

Settings and features tables
173
C
Network
(continued)
Wi-Fi
Direct
(continued)
Manual — — — You can manually
configure your
Wi-Fi Direct
network settings.
Group
Owner
——On
Off
Sets your machine
as the Group
Owner.
Device
Information
Device
Name
— — You can see the
device name of
your machine.
SSID — (My SSID)
(Connected to
other party's
SSID)
Not Connected
View the SSID of
the Group Owner.
When the machine
is not connected,
the Touchscreen
displays Not
Connected.
IP Address — — You can see the
current IP Address
of your machine.
Status
Information
Status — G/O
Active(**)
Client Active
Not Connected
Off
Wired LAN
Active
** = the number
of devices
You can see the
current Wi-Fi Direct
network status.
Signal — Strong
Medium
Weak
None
You can see the
current Wi-Fi Direct
network signal
strength.
When your machine
acts as the Group
Owner, the
Touchscreen
always displays
Strong.
I/F Enable ——On
Off*
Enable or disable
the Wi-Fi Direct
connection.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
See Software and Network User's Guide.
Visit the Brother Solutions Center to download the Web Connect Guide at
http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.