Basic User's Guide

62
8
How to dial 8
You can dial in any of the following ways.
Manual dialing 8
a Load your document.
b Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and Sending
Fax(es).
c Press all digits of the fax number.
d Press Fax Start.
Dialing from the Address Book 8
a Load your document.
b Press (Fax).
c Press Address Book.
d Do one of the following:
 Swipe up or down, or press a or b to
display the number you want.
 Press , and then enter the first
letter of the name and press OK.
e Press the number or the name you want.
f To send a fax, press Apply.
g Press Fax Start.
The machine scans and sends the fax.
LDAP search 8
If the machine is connected to your LDAP server,
you can search for information such as fax
numbers and E-mail addresses from your server.
(See Software and Network User's Guide)
Fax redial 8
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
The automatic redial only works when you set
Auto Redial to On . The default setting is On .
If you are sending a fax manually and the line is
busy, press
Hook and then Redial , wait for the
other fax machine to answer, and then press
Fax Start to try again. If you want to make a
second call to the last number dialed, you can
save time by pressing
Redial and Fax Start .
Redial only works if you dialed from the
machine.
Dialing and storing numbers 8