Manual

Receiving a fax
33
4
Paging 4
When Paging is chosen, the machine dials
the cell phone or pager number you
programmed. This activates your cell phone
or pager so you will know there is a fax
message in the machine’s memory.
If you turn on Paging, a backup copy will
automatically be printed at the machine.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Memory Receive.
h Press Memory Receive.
i Press Paging.
j Enter your cell phone or pager number
followed by # # (up to 20 digits) using the
Touchscreen's keyboard.
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press
1 8 0 0 5 5 5 1 2 3 4 # #.
k Do one of the following:
 If you are programming a cell phone
number, press OK.
 If your pager needs a PIN, enter the
PIN, press #, press Pause, enter
your fax number followed by ##.
Press OK. (For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8 9 # # )
 If you do not need a PIN, press OK.
l Press .
NOTE
You cannot change a pager number, cell
phone number or PIN remotely.