Product Safety Guide HL-L9430CDN / HL-L9470CDN / MFC-L9670CDN Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Read this guide before attempting to operate the product, or before attempting any maintenance. Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns or suffocation.
Table of Contents Symbols and Conventions Used in the Documentation............................................ 3 Compilation and Publication Notice ............................................................................ 3 Choose a Safe Location for Your Product .................................................................. 4 Connect the Product Safely.......................................................................................... 6 Use the Product Safely .................................
Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING Fire Hazard icons alert you to the possibility of a fire. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. Hot Surface icons warn you not to touch product parts that are hot. Prohibition icons indicate actions that must not be performed.
Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and 32.5°C, the humidity is between 20% and 80%, and where there is no condensation. To ensure the high print quality, the maximum ambient temperature we recommend is 32.5°C. The maximum ambient temperature to safely use this machine is 35°C. DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. Products without the scanning function Products with the scanning function • Place the product on a solid level surface. • DO NOT place this product near or over a radiator or heater.
DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product. For the products with scanning functionality, there is an added risk of injury if the scanner glass should break. Avoid placing your product in a busy area.
There are high-voltage electrodes inside the product. Before you access the inside of the product, including for routine maintenance such as cleaning, make sure you have unplugged the telephone line cord first (models with the fax function only) and then the power cord from the electrical socket, as well as any telephone/RJ-11 (models with the fax function only) or Ethernet/RJ-45 cables (network models only) from the product.
If water, other liquids, or metal objects get inside the product, immediately unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer. This product should be connected to an AC power source within the range indicated on the rating label on your machine. DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a qualified electrician.
FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire. DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead, use only a dry, lint-free cloth. For instructions on how to clean the product, see the Online User's Guide. DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside the product.
DO NOT place metal objects, such as clips, staples, or jewellery on the product. If these objects contact the electrical parts inside the product, it may cause a fire or electrical shock. DO NOT place a container holding water or liquid on the product. The water or liquid in the container may spill into the product making contact with the electrical parts inside the product, which may cause a fire or electrical shock.
(Models with the fax function only) Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged from the wall socket. Never install telephone wiring during a thunderstorm. Never install a telephone wall socket in a location that is wet or may become wet, for example, near a refrigerator or other appliance that produces condensation. Power Cord Safety: • This product is equipped with an earthed plug.
To prevent possible injuries, at least two people should lift the product by holding it from the front and back. DO NOT carry the product by holding the areas shown in the illustrations. Doing this may cause the product to slip out of your hands and may result in injury. If you use a Lower Tray/optional output tray, DO NOT carry the product with the Lower Tray/ optional output tray as you may be injured or cause damage to the product because it is not attached to the Lower Tray/optional output tray.
For your safety, unplug the product from the electrical socket when it is not used for a long time. When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product. Some products and/or their cartons contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you ingest it, seek medical attention immediately. DO NOT attempt to dismantle the toner cartridge.
DO NOT remove or damage any of the caution or warning labels inside the product. IMPORTANT • A distinct change in the product’s performance may indicate a need for service. • DO NOT connect your product to an electrical socket controlled by wall switches or automatic timers, or to the same circuit as a large appliance or other equipment that requires a significant amount of electricity. It could disrupt the power supply.
Important Safety Instructions 1. This product is equipped with a grounding type plug, a plug having three pins. This plug will fit into only a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounding-type plug. 2. DO NOT place anything on top of the power cord including this product. DO NOT allow the power cord to be stepped on. 3.
• Brother cannot accept any financial or other responsibilities that may be the result of your use of this information, including direct, special, or consequential damages. There are no warranties extended or granted by this document. Product Warranty & Liability Nothing in this guide shall affect any existing product warranty or be construed as granting any additional product warranty. Failure to follow the safety instructions in this guide may invalidate your product’s warranty.
Notes on Using the Wireless Network Models 1. For Wireless LAN Function of the Equipment 2.4 GHz Machine • Operating frequency: 2.4 - 2.4835 GHz • Equivalent isotropic radiated power (EIRP): ≤ 100 mW • Maximum power spectral density: ≤ 10 dBm / MHz (EIRP) • Carrier frequency tolerance: 20 ppm • Out-of-band emission power (Outside the 2.4 to 2.4835 GHz frequency band) ≤ -80 dBm / Hz (EIRP) • Spurious emission (radiation) power (Outside the range of the corresponding carrier ± 2.
• Spurious emission (radiation) power: ≤ -36 dBm / 100 kHz (30 - 1000 MHz) ≤ -40 dBm / 1 MHz (2400 - 2483.5 MHz) ≤ -40 dBm / 1 MHz (3400 - 3530 MHz) ≤ -33 dBm / 100 kHz (5725 - 5850 MHz) (Note: out of 2.5 times channel bandwidth of corresponding carrier) ≤ -30 dBm / 1 MHz (1 - 40 GHz for others) 2. For NFC function of the Equipment • Operating frequency: 13.553 - 13.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies. Unlawful Use of Copying or Scanning Equipment (Products with the scanning function only) It is an offence to make reproductions of certain items or documents with the intent to commit fraud. The following is a non-exhaustive list of documents which it may be unlawful to produce copies of.
These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries.
