User Manual
Table Of Contents
- Product Safety Guide
- Table of Contents
- Symbols and Conventions Used in the Documentation
- Compilation and Publication Notice
- Choose a Safe Location for Your Product
- Connect the Product Safely
- Use the Product Safely
- Important Safety Instructions
- Product Warranty & Liability
- Trademarks
- Unlawful Use of Copying or Scanning Equipment (Products with the scanning function only)
- Disclaimer
• Brother cannot accept any financial or other responsibilities that may be the result of your
use of this information, including direct, special, or consequential damages. There are no
warranties extended or granted by this document.
Product Warranty & Liability
Nothing in this guide shall affect any existing product warranty or be construed as granting any
additional product warranty. Failure to follow the safety instructions in this guide may invalidate
your product’s warranty.
WARNING
Only use the power cord supplied with this product (if included in the box).
Disconnect device
This product must be installed near an electrical socket that is easily accessible. In case of an
emergency, you must unplug the power cord from the electrical socket to shut off the power
completely.
IEC60825-1:2014 Specification (For 220 V - 240 V Models Only)
This product is a Class 1 laser product as defined in IEC60825-1:2014 specifications. The label
shown below is attached in countries where required.
This product has a Class 3B Laser Diode
which emits invisible laser radiation in the
Laser Unit. The Laser Unit should not be
opened under any circumstances.
Internal Laser radiation
Wave length: 770 nm - 800 nm
Output: 25 mW max.
Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
16