Order Supplies User's Guide

2
2.2.4 Privacy settings
Name
Description
privacy_notice_skip
Specify whether to display the privacy notice before sending
a service request.
Values: “true”, “false”.
privacy_policy_url
Specify the privacy notice URL.
2.2.5 “Order Supplies” rules
Name
Description
contact_info
(up to two
settings,
supported
models only)
contact_name
The name of the recipient of service requests (up to
255 alphanumeric characters or symbols).
contact_phone_num
The phone number of the recipient of service requests
(up to 20 digits and the following symbols: *, #, – ).
contact_email_address
The email address of the recipient of service requests
(up to 255 alphanumeric characters or symbols).
order_supplies_report_format
Specify the supplies order report format.
Values: “plaintext”, “xml”, “csv”.
order_supplies_max_order_quantity
Specify the maximum quantity of supplies the user can
order (max: 9).
order_supplies_pin_require
Specify whether the user needs to confirm the supplies
order with a PIN. Options: “true”, “false”.
order_supplies_pin
Specify the PIN required by the user to order supplies
(4 digits).
order_supplies_history
(supported models only)
Specify whether to display the previous order history
before sending the current order. Options: “true”,
“false”.
2.3 Deploying the configuration file
Use the Brother Mass Deployment Tool to send your newly created JSON file to the target machine to apply
the settings.
1. Run the Brother Mass Deployment Tool.
NOTE
Make sure you know which schema file is supported by your model. For a list of available schema files
and applicable models, see the README.TXT file in the “schema” folder. You will need this
information later.
2. Check that the machine you want is in the list.
If the machine is not in the list, click the Add devices button.
3. Select the target machine or machines.
4. Click the Set file button. Select the settings file you want to apply, and then click Open. The file you
selected appears in the Settings File column.