User manual
Table Of Contents
- Basic User’s Guide MFC-J4420DW
- You can use the following features!
- User's Guides and where to find them
- The Online User’s Guide helps you get the most out of your machine.
- If you have questions or problems, please take a look at your model’s FAQs.
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Printing from a computer
- 5 Copying
- 6 Scanning to a computer
- 7 Printing photos from a USB flash drive
- 8 Telephone services and external devices
- 9 Sending a fax
- 10 Receiving a fax
- A Routine maintenance
- B Troubleshooting
- Index
- Supplies
- brother UK
8
2
Before loading paper 2
Load only one size of paper and one type of
paper in the paper tray at a time.
When loading a different paper size in the
tray, you must also change the paper size
setting in the machine. (See Set Paper
Size and Type on page 13.)
If the Check Paper setting is On, the
machine displays a message asking if you
want to change the paper type and paper
size when you pull the paper tray out of
the machine. Change the paper size and
paper type settings if needed, according to
the instructions on the Touchscreen.
(See Check Paper setting on page 14.)
We explain how to load paper for each tray:
Paper tray . . . . . . . . . . . . . . . . See page 8.
Manual feed slot . . . . . . . . . . . . See page 11.
Loading paper in the
paper tray
2
Paper size and loading orientation 2
The paper size determines the orientation
when loading paper in the paper tray.
See the details in this chapter.
For information about other paper sizes,
see Online User’s Guide.
Loading paper 2
Paper tray
A4
Letter
Executive
Landscape orientation
A5
A6
Photo 2L
Index card
Envelope
Portrait orientation
Photo
Photo L
Portrait orientation