User Manual

Error Message Action
No Paper Fed
No Paper Fed
[Tray #1]
No Paper Fed [MP
Tray]
No Paper Fed
[Tray #2]
Do one of the following:
• Refill the paper tray, and then follow the LCD instructions.
• Remove and reload the paper, and then follow the LCD instructions.
The paper was not inserted in the center position of the MP tray.
Remove the paper and reinsert it in the center of the MP tray, and then
follow the LCD instructions.
See Related Information: Load Paper in the Multi-purpose Tray (MP
Tray) at the end of this section.
The Jam Clear Cover is not closed correctly.
Out of Fax Memory
Do one of the following:
• Clear the data from the memory. To gain extra memory, you can
turn off Memory Receive.
For more information, see the Online User's Guide: Turn Off
Memory Receive.
• Print the faxes stored in the memory.
For more information, see the Online User's Guide: Print a Fax
Stored in the Machine's Memory.
Out of Memory
If a fax-sending or copy operation is in progress:
• Press or Quit or Close and wait until the other operations
that are in progress finish, and then try again.
• Press Send Now to send the pages scanned so far.
• Press Partial Print to copy the pages scanned so far.
• Clear the data in the memory. To gain extra memory, you can turn
off Memory Receive.
For more information, see the Online User's Guide: Turn Off
Memory Receive.
• Print the faxes stored in the memory.
For more information, see the Online User's Guide: Print a Fax
Stored in the Machine's Memory.
Paper Low Tray #1
Paper Low Tray #2
Refill the paper in the paper tray indicated on the LCD.
44