User Guide

Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan Photos and Graphics
Scan Photos and Graphics
Send scanned photos or graphics directly to your computer.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use either ControlCenter4 (Windows
®
) or Brother iPrint&Scan (Mac) software.
1. Load your document.
2. Press
[Scan].
3. Swipe left or right or press d or c to display
[to PC].
The icon moves to the middle of the touchscreen and is highlighted in blue.
4. Press
[to PC].
5. Press [to Image].
6. If the machine is connected over the network, swipe up or down or press a or b to display the computer
where you want to send the data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then
press [OK].
7. Do one of the following:
• To change the settings, press [Options] or [Set at Device].
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
To use the
[Options] or [Set at Device] setting, a computer with either ControlCenter4 (Windows
®
)
or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
8. To scan both sides of the document (for MFC-J6945DW only), press [2-sided Scan], and then select the
document type.
Option Description
2-sided Scan: Long
Edge
Scan the document so that the pages are read by flipping them on the long
edge.
121