User Guide

Table Of Contents
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Send Scanned Data to an Email
Server
Send Scanned Data to an Email Server
Related Models: MFC-J6945DW
Send scanned data from your Brother machine directly to your email server for delivery to an email recipient
without using a computer.
To send scanned data to an email server, you must configure your machine to communicate with your
network and email server. You can configure these items from the machine's control panel, Web Based
Management, or BRAdmin Professional.
1. Load your document.
2. Press [Scan] > [to E-mail Server].
If you have registered your email address with your user ID, the [to My E-mail] button appears
when you log on to the machine using Secure Function Lock, Active Directory
®
Authentication or LDAP
Authentication.
To send scanned data to your email address, press [to My E-mail]. When your email address
appears on the LCD, press [OK].
To enable this feature in Web Based Management, click the Scan tab, and then click the Scan to E-
mail Server menu in the left navigation bar. In the Send to My E-mail field, select On.
3. Do one of the following to enter the destination email address:
To enter the email address manually, press [Manual], and then enter the email address using the
character buttons on the LCD. When finished, press [OK].
If the email address is stored in the machine's address book, press [Address Book], and then select
the email address.
Press [OK].
4. Confirm the email address, and then press [Next].
5. Do one of the following:
To change the settings, press [Options], and then go to the next step.
- To set your own default settings: after making changes to settings, press the [Set New Default]
option, and then press [Yes].
- To restore the factory settings: press [Factory Reset], and then press [Yes].
Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
6. Select the scan settings you want to change, and then press [OK].
Option Description
2-sided Scan
(Available only for certain models)
Select the 2-sided scan mode.
Scan Type
Select the scan type for your document.
Resolution
Select the scan resolution for your document.
File Type
Select the file format for your document.
133