User Guide

Option Description
Quality Select a quality setting. If you choose the User Select option, the
machine will prompt users to select a setting each time they use the
scan profile.
File Type Select the file type you want to use for the scanned document. If you
choose the User Select option, the machine will prompt users to
select a setting each time they use the scan profile.
Document Size Select your document size from the list. This is necessary to make
sure the scanned file is the correct size.
Scan Long Paper (ADF) Select the On option to scan a document printed on long paper using
the ADF.
ADF Auto Deskew Select Auto to set the machine to correct document skewing
automatically as the pages are scanned from the ADF.
Skip Blank Page Select the On option to remove blank pages of the document from
the scanning results.
Skip Blank Page Sensitivity Select the sensitivity level for detecting blank pages in the scanned
data. The higher the sensitivity, the easier it is for the machine to
detect blank pages.
2-sided Scan(MFC-J6945DW) Select Long Edge or Short Edge to scan both sides of the
document, depending on the layout of your original.
Remove Background Color Change the amount of background color that is removed.
Brightness Select the brightness level.
Contrast Select the contrast level.
Use PIN for Authentication To PIN-protect this profile, select On, and then type a four-digit PIN in
the PIN Code field.
Auth. Method Select the authentication method.
Username Type a user name (up to 96 characters) that has permission to write
data to the folder specified in the Network Folder Path field. If the
user name is part of a domain, type the user name in one of the
following styles:
user@domain
domain\user
Password Type the password (up to 32 characters) associated with the user
name you entered in the Username field. Type the password again in
the Retype password field.
Kerberos Server Address Type the Kerberos Server Address (for example:
kerberos.example.com; up to 64 characters).
7. Click Submit.
8. You must configure the SNTP (network time server) or you must set the date, time and time zone correctly on
the control panel. The time must match the time used by the Kerberos Server and CIFS Server.
Related Information
• Scan to Network (Windows
®
)
• Set the Date and Time Using Web Based Management
148