User Guide

Table Of Contents

Home > Fax > Receive a Fax > Remote Fax Retrieval > Use Your Remote Access Code

Use Your Remote Access Code

1. When away from your Brother machine, dial your fax number from a touch-tone telephone or fax machine.

2. When your machine answers, immediately enter your three-digit Remote Access Code, followed by *.

3. Your Brother machine signals if it has received faxes:

• One long beep - the machine received at least one fax

• No beeps - the machine has not received a fax

4. When the machine gives two short beeps, enter a command.

• The machine will hang up if you wait longer than 30 seconds to enter a command.

• The machine will beep three times if you enter an invalid command.

5. When finished, press 9, and then press 0 to deactivate your machine.

6. Hang up.

This feature may not be available in some countries or supported by your local telephone company.

Related Information

• Remote Fax Retrieval