User Guide

Table Of Contents
Home > Network > Advanced Network Features > Fax Using the Internet (I-Fax) > Configure Your Brother
Machine for Email or I-Fax > Receive an I-Fax Automatically
Receive an I-Fax Automatically
Related Models: MFC-J6945DW
To receive an I-Fax automatically, use Web Based Management to configure receiving options, if needed.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
.
4. Click the Fax tab.
5. Click the E-mail Receive menu in the left navigation bar and configure the settings as needed.
There are two ways to receive email messages:
POP3/IMAP4 receiving at regular intervals
POP3/IMAP4 receiving, manually initiated
When using POP3/IMAP4 receiving, the machine polls your email server to receive data. Polling can occur
at set intervals (for example, you can configure the machine to poll the email server every ten minutes) or
you can manually poll the server.
6. When finished, click Submit.
377