User Guide

Table Of Contents
Home > Security > Secure Function Lock 3.0 > Register an External IC Card Reader
Register an External IC Card Reader
When you connect an external IC card reader, use Web Based Management to register the card reader. Your
machine supports HID class driver supported external IC card readers.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
.
4. Click the Administrator tab.
5. Click the External Card Reader menu, and then enter the necessary information.
6. Click Submit.
7. Restart your Brother machine to activate the configuration.
8. Unplug the power cord from the AC power outlet.
9. Connect the card reader to your machine, and then plug the machine’s power cord into the AC power outlet.
10. Touch the card to the card reader when using card authentication.
Related Information
Secure Function Lock 3.0
411