User Guide

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Miscellaneous
(USA only)
[Printer]
[Settings] > [All Settings] > [Printer]
(MFC-J6945DW)
Level 1
Level 2 Level 3 Descriptions
Emulation
- - Select the emulation mode.
Print Options Font List HP LaserJet
Print a list of the machine’s internal fonts.
BR-Script 3
Test Print
- Print a test page.
2-sided 2-sided Print
- Enable or disable 2-sided printing and choose long edge or
short edge.
HP Tray Command
- - Select the correct version of HP LaserJet emulation.
Reset Printer
- - Restore the printer settings to the factory settings.
[Network]
[Settings] > [All Settings] > [Network]
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method
- Select the Boot method that best
suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server
- Specify the IP address of the
primary or secondary WINS
server.
DNS Server
- Specify the IP address of the
primary or secondary DNS
server.
APIPA
- Set the machine to allocate the
IP address from the link-local
address range automatically.
IPv6
- Turn the IPv6 protocol on or off.
For more detailed information,
go to your model's FAQs &
Troubleshooting page on the
Brother Solutions Center at
support.brother.com.
Ethernet
- - Select the Ethernet link mode.
Wired Status
- - View the current wired status.
MAC Address
- - View the machine's MAC
address.
662