User Guide

Table Of Contents
Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP BOOT Method
- Select the Boot method that best
suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server
- Specify the IP address of the
primary or secondary WINS
server.
DNS Server
- Specify the IP address of the
primary or secondary DNS
server.
APIPA
- Set the machine to allocate the
IP address from the link-local
address range automatically.
IPv6
- Turn the IPv6 protocol on or off.
For more detailed information,
go to your model's FAQs &
Troubleshooting page on the
Brother Solutions Center at
support.brother.com.
Setup Wizard
- - Configure your wireless network
settings manually.
WLAN
Assistant
- - Configure your wireless network
settings using the Brother
installation disc.
WPS
- - Configure your wireless network
settings using the one-button
push method.
WPS w/ PIN
Code
- - Configure your wireless network
settings using WPS with a PIN.
WLAN Status Status
- View the current wireless
network status.
Signal
- View the current wireless
network signal strength.
SSID
- View the current SSID.
Comm. Mode
- View the current Communication
mode.
MAC Address
- - View the machine's MAC
address.
Wi-Fi Direct Push Button
- - Configure your Wi-Fi Direct
network settings using the one-
button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS with
a PIN code.
Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the Group
Owner.
663