Manual

To set up multiple columns, specify column options in the Page Setup dialog
box (from the File menu). When you set multiple columns, specify the
number of columns, the gutter (or spacing) between columns, and the width
of any vertical rule(s) (the lines in between the columns). Word Processing
initially calculates a uniform column width for all columns based on the
number of columns, the spacing between columns, the size of the page, the
page orientation, and the page margins.
The following sample document shows the result of setting the column
characteristics:
Thedistancebetweencolumns
is 0.25inches.
Theverticalruleis 2 pointswide.
The columnsettingisIhres.
l_ To set or change the columns:
1. Place the insertion point in the document.
2. Select Page Setup from the File menu. A dialog box appears.
3. Fill in the dialog box:
• Columns. Select the number of columns.
Spacing. If you have more than one column, select the distance
between columns (as well as the relative column width). Spacing is
the same between all columns. By default, this setting is 0.125 inches;
you can increase this up to 1.0 inch.
Rule Width. To place a vertical rule, select the width of a vertical
rule. By default, this setting is zero (0) points, or no vertical rule; you
can increase this up to 9 points.
Word Processing 30