Thank you for purchasing the P-touch 530/550! With your new P-touch, you can create labels and stamps for any need. Select from the many frames, character sizes and styles to design beautiful custom labels and stamps. In a addition, the variety of tape and ink colors available allow you to print personalized labels, useful for color-coding. You no longer have to worry about urgent tasks that require professional printing.
ABOUT THIS MANUAL.................................................................................. 1 QUICK REFERENCE GUIDE BEFORE YOU START MACHINE DIAGRAM...................................................................................8 GENERAL PRECAUTIONS ....................................................................... 10 BATTERIS................................................................................................. 11 OPTIONAL AC ADAPTOR ...............................................
Barcode FUNCTION .................................................................................. 80 Zoom KEY................................................................................................. 85 Contrast KEY............................................................................................. 86 Label length FUNCTION ............................................................................ 87 Auto Formats Key ........................................................................
Although the P-touch 530/550 is easy to use, we suggest that you read this manual carefully before starting. This manual consists of a reference guide and three chapter: QUICK REFERENCE GUIDE This guide provides quick and simple instructions on setting up and using the machine. BEFORE YOU START This chapter provides basic information concerning the tape cassettes, power supplies, and labels.
2
3
4
5
6
8
9
* Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. * Do not pull on the tape being fed from the P-touch. Doing so may damage the tape cassette. * Avoid using the machine in extremely dusty place. Keep in out of both direct sunlight and rain. * When printing a label, a horizontal line appears on your label, this may be an indication that dust is on the print head. To clean the print head, gently rub a cotton swab over the print head to remove dust. (See page 19.
11
12
13
14
15
16
17
+ White garments made from 100% cotton with a plain (smooth) surface are best for making iron-on transfers. You can also make transfers to garments made from 100% linen or cotton/polyester blends as long as they have a plain (smooth) surface. The iron-on will not adhere properly to any cloth with a rough surface, such as pile or denim, or with a waterproof surface.
Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers. This is particularly likely when you are using the unit outdoors or in a very dusty environment. If a section of the print head is covered with dust, a blank horizontal streak may appear through the text in the printed label. Therefore, as with a tape recorder, the machine’s head may need to be cleaned from time to time. TO CLEAN THE PRINT HEAD Ê Turn off the machine.
20
In Learning the Ropes, you will find a series of label-making examples. As the example labels become increasingly more complex, you will learn how to use the more advanced features of the machine. The first exercise consists of creating a simple one-line name tag. The second, an equipment instruction label, takes advantage of several additional machine capabilities. The third is a four-line address label. Finally, the storage shelf label shows you how to use the unit’s more expert functions.
After you have inserted the batteries and the enclosed tape cassette as explained in the Before You Start chapter, we can practice using some of the basic functions of your P-touch 530/550. We must first begin by turning on the power to the machine. The WYSIWYG (what-you-see-is-what-you-get) mode allows you to see exactly how the label would appear if it were printed. The flashing bracket that appears on the display is called the “cursor”.
In this first example, we will use the most basic functions of your P-touch to print simple name tag shown below. + The label in this example was made using a ½” (12-mm)-wide tape cassette. ENTER THE TEXT For this label, we will begin by typing “JOHN SMITH”, then later we will edit the text and change its format. Typing on the P-touch is just like typing on a typewriter or a computer.
25
26
27
28
PRINT THE TEXT Since our text is finished, we can print it. If we used the default settings pre-programmed into the P-touch for the Special Print function, we could print one whole copy of the label, which would automatically be cut after printing is finished.
Now that we know how to enter, edit and print text, we can practice creating a multi-line label. In this example, we will also learn how to use the Special Print and the Format key functions to print three copies of the copier label shown below. + The label in this example was made using a ½” (12-mm)-wide tape cassette. CLEARING THE DISPLAY Before entering our new text, we must first erase the text that is shown in the display from the previous time that the machine was used.
31
32
33
PRINT THE TEXT Suppose we wish to print three copies this label. To do this, we would use the COPIES parameter of the Special Print function. For more details on the Special Print function parameters, refer to pages 128 and 129.
35
In this example, we will recall our name tag text file, change it into a multi-line address label, then print using the color printing functions. We will also use some of the other text format keys to emphasize part of the text. + The label in this example can be printed on 3/4”(18-mm)-, 1”(24-mm)- or 1-1/2” (36mm)-wide tape. RECALLING TEXT Since we saved the name tag text in the memory, we can recall it to edit it. If we had not saved the text, it would be lost and we would have to type it in again.
ENTERING THE TEXT Now, we can type in the address and telephone number for our label.
Since the text is displayed in the WYSIWYG mode, it starts to become small and difficult to read when too many lines are entered. Therefore, we will use the zoom function so that we can see the text more clearly.
39
The text format settings could also have been chosen before the text was entered. In this way, the selected settings would remain until they are changed again. Next, we can use the Format key to add a frame all around our address label text.
41
PRINTING THE TEXT Now, let’s assume we wish to print a copy of this label in color. Therefore, we must decide which ink colors will be used for COLOR1, COLOR2 and COLOR3. For this example, let’s fill in the name with red (COLOR2) and print the frame in blue (COLOR3). We will print the rest of the text, which has default setting (COLOR1), in black. For more details on color printing, refer to pages 123 to 124.
43
44
In this final example, we will practice using the New Block function as will as more specialized features, such as the Barcode and Seq. Numbering (sequential numbering) functions, in order to make the following two labels which could be used to describe objects stored on a shelf. + The label in this example can be printed on ¾”(18-mm)-, 1”(24-mm)- or 1-1/2” (36-mm)-wide tape. Each time the number of lines changes, a new block of text must be created.
CLEARING THE DISPLAY Again, we must first erase the text that is shown in the display from the previous time that the machine was used. ENTERING THE TEXT Now, we can begin entering the storage shelf label text. Since we know that we want to use a different font for the first block, we can select the new font before entering the text.
Since we now want to change from a one-line to a four-line block, we will use the New Block function. A detailed explanation of multi-block labeling can be found in New Block FUNCTION on pages 66 and 67.
Now, we must enter the last part of the text, the bar code. Although there are many settings for bar codes, let’s use protocol CODE 39, which has an unspecified (free) number of digits. More details on the Barcode function can be found on pages 80 to 84.
PRINTING THE TEXT Finally, let’s assume that we want to put labels on two different shelves (B1 and B2) while keeping the same bar code. To do this, we can use the Seq. Numbering (sequential numbering) function to print two copies of our label while automatically increasing the shelf number after each label is printed. More details can be found in Seq. Numbering FUNCTION on pages 130 to 133.
50
With these four examples, we have covered most of the basic features of your P-touch 530/ 550 so that you can begin creating your own customized labels. If you have questions about any of the functions, refer to the appropriate explanation in the For Your Information chapter.
52
In this chapter, you will find detailed explanations for all of the machine’s features. Each topic is given its own section, making this reference chapter easy to use. Operational examples of most features can also be found in the Learning the Ropes practice sessions. If you are a first-time P-touch user, we suggest that you work through those exercises before starting to make labels on your own. This For Your Information chapter provides supplementary information.
This For Your Information chapter gives detailed explanations of all of this machine’s features. The following list shows which topics are covered and on which page an explanation of their operation can be found.
batteries have been installed or the machine has been plugged in using the optional AC adaptor, the previous session’s information is displayed when the machine is turned on. This feature allows you to stop work on a label, turn off the machine, and return to it later without having to re-enter the text.
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
The following symbols can only be entered when using protocols EAN 128 or CODE 128.
82
83
84
85
86
87
88
89
Preset Label Templates A. VCR VHS (3/4” (18mm)) B. VCR 8mm-1 (3/8” (9mm)) C. VCR 8mm-2 (1.2” (12mm)) D. VCR VHSC-1 (1/2” (12mm)) E. VCR VHSC-2 (3/4” (18mm)) F. AUDIO-1 (1/4” (6mm)) G. AUDIO-2 (3/8” (9mm), 1/2” (12mm)) H. AUDIO-3 (3/8” (9mm), 1/2” (12mm)) I. NAME PLATE (3/4” (18mm), 11/2” (36mm)) J. ADDRESS (3/4” (18mm),1” (24mm), 11/2” (36mm)) K. EQUIPMENT (3/4” (18mm), 1” (24mm), 11/2” (36mm)) L. EQUIPMENT (1/2” (12mm)) M.SLIDE (1/2” (12mm)) N. PRICE (3/4” (18mm), 1” (24mm),11/2” (36mm)) O.
91
92
93
94
95
96
97
98
99
100
101
AUTO size setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest possible size. However, seven other point sizes are available and each can be printed in narrow, medium or wide characters. The default size setting is AUTO and the default width setting is medium. When the AUTO size setting is selected, “AUTO” appears in the top left-hand corner of the display.
103
104
105
106
107
108
109
110
111
112
113
114
115
116
The FEED function allows you to select the size of the margins on the left and right side of your test. The default setting is FULL; however, three other settings are also available. FULL (1” (25 mm)) NONE (1/6” (4 mm)) NERROW (1/3” (8 mm)) MEDIUM (1/2” (12 mm)) + The FEED function can only be applied to the entire text; it cannot be applied to just part of the text.
You can choose to align the text in one of four ways. The default setting is LEFT; however, three other settings are also available. LEFT CENTER RIGHT JUSTIFY + The H.ALI (horizontal alignment) function can only be applied to the entire text; it cannot be applied to just part of the text.
119
120
121
122
123
124
125
126
127
The Special Print function allows you to set the number of copies of the label that will be printed, set whether the machine will automatically cut off each label, and turn the split printing function on and off. Parameters Settings COPIES (number of label copies that will be printed) 1 to 99 A.
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
HARDWARE Input device: KEYBOARD – 63 keys LCD: 112 x 32 dots 23 indicators Print type: 23 indicators 5 widths available Power supply 1/4” (6 mm) 3/8” (9 mm) 1/2” (12 mm) 3/4” (18 mm) 1” (24 mm) 11/2” (36 mm) 8 AA alkaline batteries (optional AC adapter model AD-60) Auto power off if no key pressed within 5 minutes Print head: 128 dot / 180 dpi Dimensions: 8 45/64” x 9 31/32” x 3 27/64” (221 x 253 x 87 mm) Weight 2 lbs. 10 ozs. (1.
The P-touch 530/550 features the following: 148 • WYSIWYG display • Color printing • Stamp creating • Pre-formatted label templates • Multi-line printing (up to 7 lines) • Multi-block printing (up to 5 blocks) • 7 sizes & 14 styles • Text and label framing • Text underling • Vertical printing • Mirror printing • Horizontal alignment adjustment • Adjustable tape feed • Label length setting • Repeat printing • Split printing • Numbering function • Bar code generation • Z
A A. CUT parameter.............................128 AC adapter ........................................10,12 Accent function .................................78 All function.........................................27,97 Alt key................................................60 Area key ............................................39,97 Auto Formats key..............................88 Automatic backup .............................56 Automatic power off ..........................56 B Backspace key .............
Font key.............................................100 Format key ........................................32,40,110 Frame ................................................107,112 Color.............................................113 FRAME COLOR function..................41,113 G GLOBAL FRAME function ................33,41,112 H H.ALI (horizontal alignment function)......33,118 HOME key .........................................58 I Indicator Auto Formats ...............................88 Caps ..............
Character width............................102 Fill-in colors..................................114 Fonts ............................................100 Frame color..................................113 Frames .........................................107,112 Horizontal alignment....................118 Italics ............................................104 Label formats ...............................110-121 Label length .................................116 Mirror printing...............................
• Supplies Obtain tape cassettes, AC adapters, and tape cutters from you nearest authorized dealer. Brother cannot be held responsible for trouble caused by the use of unauthorized supplies. Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. Stock No.
Stock No. Description 1/4” (6 mm) laminated tapes TZ-111 Black Characters on Clear Adhesive TZ-211 Black Characters on White Adhesive TZ-315 White Characters on Black Adhesive QTY/PACKAGE PRICE 1 1 1 $12.99 $14.99 $17.99 QTY/PACKAGE 1 1 PRICE $29.99 $24.99 White Tape Black ink ribbon Red ink ribbon Blue ink ribbon QTY/PACKAGE 1 1 1 1 PRICE $19.99 $12.99 $12.99 $12.
ACCESSORY ORDER FORM This order form is provided for your convenience should your retailer not stock the item(s) needed or if you prefer to order by telephone. To order by phone, please call Brother International at 1-800-668-2768 and have your Visa or MasterCard available. Stock No. Description Price Quantity Total Total Prices subject to change without notice. Before Calling 1. Review the reverse side of this form and select the desired items. 2.
ACCESSORY ORDER FORM This order form is provided for your convenience should your retailer not stock the item(s) needed or if you prefer to order by telephone. To order by phone, please call Brother International at 1-800-668-2768 and have your Visa or MasterCard available. Stock No. Description Price Quantity Total Total Prices subject to change without notice. Before Calling 1. Review the reverse side of this form and select the desired items. 2.
158
GUÍA DEL USUARIO
Enhorabuena por la adquisición de la P-touch 530/550. Su nueva P-touch le permitirá diseñar y crear etiquetas y membretes para cualquier topo de aplicatión. Su versatilidad le permitirá crear hermosas etiquetas y membretes personales seleccionando distintos diseños de marcos y muchos tamaños y estilos de caracteres. Además, la variedad de cintas y de los colores de las cintas le hará posible imprimir etiquetas personales, útiles para relleno con código de colores.
PRECAUCIONES GENERALES .......................................................................................... 1 PILAS ................................................................................................................................... 2 ADAPTADOR DE CA OPCIONAL ........................................................................................ 2 CASSETTES DE CINTA.......................................................................................................
ii
• Con esta máquina emplee sólo cintas TZ Brother. No emplee cintas que no tengan la merca. • No tire de la cinta que se alimenta desde la P-touch. Podría dañar el cassette de cinta. • No emplee la máquina en lugares demasiado polvorientos. Manténgala apartada de la luz directa del sol y de la lluvia. • No exponga la máquina a altas temperaturas ni humedad. No la deje nunca en el tablero de instrumentos ni en la parte trasera de su sutomóvil.
Esta máquina ligera y portátil puede utilizarse en cualquier lugar instalando ocho (8) pilas Alcalinas AA. Cuando cambie las pilas, reemplace siempre las ocho pilas al mismo tiempo.
Un cassette de TZ se suministra con la unidad. Sin embargo, puesto que para esta máquina hay disponibles una amplia gama de cassettes de cinta TZ, tintas y cassettes de cinta para impresión en color de distintos colores y tamaños, es posible crear etiquetas con distinción codificadas por colores y estilizadas. Además, hemos diseñado esta máquina para permitirle cambiar rápida y fácilmente los cassettes de cinta.
PARA CAMBIAR LOS CASSETTES DE TINTA Y DE CINTA PARA IMPRESIÓN EN COLOR: 4
Avance de la cinta por el cassette 5
De vez en cuando, motas de polvo o suciedad se adhieren al cabezal de impresión y a los rodillos de la máquina. Suele suceder cuando se emplea la unidad en exteriores o en lugares con mucho polvo. Si alguna parte del cabezal de impresión está cubierta de polvo, es posible que aparezca una franja horizontal blanca por el texto de la etiqueta impresa. Por lo tanto, al igual que con las grabadoras de cintas, el cabezal de la máquina deberá limpiarse de vez en cuando.
7
8
9
10
11
12
La función de códigos barras Barcode, que permite añadir códigos de barras a las etiquetas impresas, es una las caracteríisticas más avanzadas de la máquina. + En esta sección explicaremos cómo introducir un código de barras en el texto. No tiene el propósito de ser una introducción amplia al concepto de los códigos de battas. Para encontrar información más detallada al respecto, consulte uno de los muchos libros de referencia disponibles en el mercado.
Selección de los ajustes de parámetros de código de barras Los caracteres especiales siguientes sólo pueden introducirse cuando se emplea los tipos EAN 128 o Code 128.
VALOR CARÁCTER VALOR CARÁCTER VALOR CARÁCTER 63 63 65 66 67 68 69 70 _ NUL SOH STX ETX EOT ENQ ACK 81 82 83 84 85 86 87 88 DC1 DC2 DC3 DC4 NAK SYN ETB CAN 95 95 96 97 100 102 US DEL FNC3 FNC2 FNC4 FNC1 Los símbolos siguientes sólo pueden introducirse cuando se emplea los protocolos CODE 39 o CODABAR.
16
Esta función se emplea para visualizar la longitud de la etiqueta en pulgadas o en centímetros, dependiendo del ajuste de la función UNIT. Para más información sobre el cambio de unidades que se emplean para visualizar la longitud, consulte a FUNCIÓN UNIDAD de la página.
18
Plantilla de etiquetas preajustadas VCR VHS (3/4” (18 mm)) VCR 8mm-1 (3/8” (9 mm)) VCR 8mm-2 (1/2” (12 mm)) VCR VHSC-1 (1/2” (12 mm)) VCR VHSC-2 (3/4” (18 mm)) AUDIO-1 (1/4” (6 mm)) AUDIO-2 (3/8” (9 mm), 1/2” (12 mm)) AUDIO-3 (3/8” (9 mm), 1/2” (12 mm)) NAME PLATE (3/4” (18 mm), 1 1/2” (36 mm)) ADDRESS (3/4” (18 mm), 1 1/2” (36 mm)) EQUIPMENT (3/4” (18 mm), 1” (24 mm), 1 1/2” (36 mm)) EQUIPMENT (1/2” (12 mm)) SLIDE (1/2” (12 mm)) PRICE (3/4” (18 mm), 1” (24 mm), 1 1/2” (36 mm)) SALE PRICE (3/4” (18 mm), 1”
Los ajustes de tipos de caracteres siguientes están disponibles en la P-touch 530: Tipo 1 (Helsinki), Tipo 2 (Brussels), Tipo 3 (Calgary), Tipo 4 (US), Tipo 5 (Belgium) Los ajustes de tipos de caracteres siguientes están disponibles en la P-touch 550: Tipo 1 (Helsinki), Tipo 2 (Brussels), Tipo 3 (Calgary), Tipo 4 (US),Tipo 5 (San Diego), Tipo 6 (Florida), Tipo 7 (Istanbul), y Tipo 8 (Bermuda) El ajuste del tipo de caracteres seleccionado para la posición actual del cursor se muestra en los indicadores Font
El ajuste del tamaño de ajuste inicial es AUTO y el ajuste inicial para la anchura es media. Caundo se selecciona el ajuste del tamaño AUTO, “AUTO” aparece en la esquina superior izquierda del visualizador. Consulte el apartado de MUESTRAS, al final de esta sección, para ver muestras de los ajustes disponibles. + Cuando el parámetro SPLIT de la función Special Print se ajusta a ON, el texto se imprimirá automáticamente en un tamaño de caracters grandes.
22
23
24
25
26
Podrá seleccionar cuál de lostres colores de tinra se deberá emplear para imprimir cualquier subrayado, encuadre, tachado, o sombreado del texto durante la impresión en color. Para más detalles sobre la impresión en color, consulte la FUNCIÓN DE IMPRESIÓN EN COLOR en las páginas 35 a 36. El ajuste inicial de fábrica es COLOR 1. + Antes de imprimir con la función de IMPRESIÓN EN COLOR, asegúrese de haber ajustado la función de COLOR DEL ENCUADRE.
Cuando emplee la función de IMPRESIÓN EN COLOR para imprimir texto formateado en cualquier estilo que no sea A (normal) o A (negrilla), podrá seleccionar un color de relleno para las partes de caracteres que normalmente se dejan en blanco como se muestra en el apartado de MUESTRAS. Para más detalles sobre la impresión en color, consulte la FUNCIÓN DE IMPRESIÓN EN COLOR en las páginas 35 a 36. El ajuste inicial de fábrica es OFF.
La longitud de la etiqueta puede ajustarse de dos formas distintas. Con el ajuste de longitud AUTO, la máquina compara el texto introducido con el tamaño de la cinta instalada y ajusta automáticamente la longitud de la etiqueta para adaptarla al texto. Sin embargo, si usted desea ajustar la longitud de la etiqueta, podrá ajustarla entre 3,8 cm (1,5”) y 28,7 cm (11,3”). El ajuste inicial de fábrica es AUTO.
La función de AVANCE DE LA CINTA le permite seleccionar el tamaño de los márgenes izquierdo y derecho de su texto. El ajuste inicial de fábrica es FULL; aunque tembién tendrá disponibles otros ajustes. FULL (25 mm (1”)) NONE (4 mm (1/6”)) NARROW (8 mm (1/3”)) MEDIUM (12 mm (1/2”)) + La función de AVANCE DE LA CINTA sólo pude aplicarse a todo el texto; no puede aplicarse sólo a parte del texto.
Podrá seleccionar la a alineación del texto de cuatro formas. El ajuste inicial de fábrica es LEFT; aunque tendrá también disponibles otros ajustes. LEFT CENTER RIGHT JUSTIFY + La función H.ALI. (alineación horizontal) sólo puede aplicarse a todo el texto; no puede aplicarse sólo a parte del texto.
El texto introducido podrá imprimirse verticalmente a lo lardo de la etiqueta. El ajuste inicial de fábrica es OFF. + La función VERT (impresión vertical) sólo puede aplicarse a todo de texto; no puede aplicarse sólo a parte del texto. Cualquier etiqueta que usted cree podrá imprimise empleeando esta función.
Con esta función, podrá imprimir el texto de modo que los caracteres puedan leerse desde el lado del adhesivo de la cinta. Si se adhieren etiquetas con impresión de espejo, usando cinta transparente, a un vidrio, como pueda ser en un escaparate, o en otro material transparente, podrán leerse correctamente desde el lado opuesto. El ajuste inicial de fábrica es OFF. + Cuando la función MIRROR se ajusta a ON, imprima el texto transparente.
Las mediciones se muestran en el visualizador en centímetros (cm) o en pulgadas (inch). Con esta función, usted podrá seleccionar las unidades utilizadas para visualizar las mediciones. El ajuste inicial de fábrica es el de pulgadas (inch). + Esta ajuste sólo puede aplicarse a todas las mediciones; no puede aplicarse sólo a parte de ellas.
35
36
La función de membrete Stamp le permite crear con rapidez y facilidad sus propios membretes personalizados. Seleccione esta función para centrar automáticamente el texto y ajustar la longitud de la cinta y los márgenes a un formato perfecto para los soportes de películas de membrete entintados. Puesto que el soporte del membrete es reutilizable, haga nuevos membretes reemplazando la película del membrete en el soporte de películas.
38
La dunción Special Print la permite ajustar el número de copias de la etiqueta que se imprimirán, ajustar si la máquina corta automáticamente cada etiqueta, y activar y desactivar la función de impresión dividida. Parámetros Ajustes COPIES (número de copias de la Etiqueta que se imprimirán) 1 a 99 A.
Si el parámetro SPLIT está ajustado a ON, las etiquetas como las mostradas arriba se imprimirán. Para colocaras juntas de forma que no se dividan los caracteres, corte el espacio en blanco de la parte inferior de la etiqueta superior, y la parte superior de la etiqueta inferior. + 40 Cuando el parámetro SPLIT eatá activado, solamente se imprimirá una copia completa de la etiqueta, independientemente del ajuste del parámetro de copias.
La función de numeración secuencial (Seq. Numbering) puede utilizarse para imprimir varias copias del mismo texto mientras se incrementan ciertos caracteres (letras o números) después de imprimirse cada etiqueta. Este tipo de incremento antomátoco es muy útil para imprimir etiquetas con numeración secuencial, para producir etiquetas de control u otras etiquetas que requieren códigos con incremento ascendente. + El texto sólo puede contener un campo numérico.
42
Cuando se almacena cada archivo, se le da un número para poderlo abrir posteriormente con facilidad. En la memoria pueden almacenarse hasta 100 archivos de texto o hasta nnos 3.000 caracteres enla P-touch 550 (o 1.000 caracteres en la P-touch 530). Puesto que se llama una copia del archivo de texto almacenado cuando se emplea la función de llamada (Recall), puede editarse o imprimirse el texto sin cambiar el archivo original. Cuando un archivo deja de ser necesario, podrá emplear la función M.
44
45