EL LABELING C I N O R T EC SYSTEM INTRODUCTION GETTING STARTED EDITING A LABEL LABEL PRINTING USING THE FILE MEMORY MAINTAINNING YOUR P-TOUCH LABELER TROUBLESHOOTING APPENDIX INDEX
INTRODUCTION Thank you for purchasing the P-touch labeler PT-2030. Your new P-touch labeler is an easy to operate, feature packed labeling system that makes creating professional, high quality labels a breeze. This manual contains various precautions and basic procedures for using this labeler. Read this manual carefully before using and keep in a handy place for future reference.
Brother® Two-Year Limited Warranty and Replacement Service (USA Only) Who is covered: • This limited warranty ("warranty") is given only to the original end-user/retail purchaser (referred to in this warranty as "Original Purchaser") of the accompanying product, consumables and accessories (collectively referred to in this warranty as "this Product").
What Brother will do: If the problem reported concerning your Machine and/or accompanying Consumable and Accessory Items is covered by this warranty and if you first reported the problem to Brother or an Authorized Service Center within the applicable warranty period, Brother or its Authorized Service Center will repair or replace the Machine and/or accompanying Consumable and Accessory Items at no charge to you for parts or labor.
Limitations: Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of the machine. Except for that repair or replacement as described above, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief. Because some states do not allow the exclusion or limitation of consequential or incidental damages, the above limitation may not apply to you.
Important Information Should you have questions, or need information about your Brother Product, we have a variety of support options for you to choose from: USA-Customer Service: Customer Service 1-877-BROTHER (877-276-8437) Customer Service 1-901-379-1210 (fax) World Wide Web www.brother-usa.com Supplies / Accessories www.brothermall.com or 1-877-552-MALL (6255) BROTHER INTERNATIONAL CORPORATION 100 SOMERSET CORPORATE BLVD.
How to use the P-touch labeler ..................................................................................... 4 Safety Precautions ........................................................................................................ 5 General Precautions...................................................................................................... 8 Symbols Used in this Guide ..........................................................................................
INTRODUCTION Setting Label Attributes ................................................................................................29 Using Auto-Format Layouts .........................................................................................31 Using Templates - Example creating an Asset Tag...............................................31 Using Block Layouts ..............................................................................................34 Creating a Bar Code Label..................
Specifications .............................................................................................................. 59 INDEX .................................................................................................... 60 z INTRODUCTION APPENDIX.............................................................................................
INTRODUCTION How to use the P-touch labeler Create a label with the P-touch labeler 1 GETTING STARTED • Prepare the P-touch labeler. P. 10 2 CREATING A LABEL • Entering and Editing text. P. 20 • Entering Symbols. P. 22 • Entering Accented Characters. In addition to entering text, the P-touch labeler has a large range of formatting options. Create labels like these : P. 24 • Using Auto-Format Layouts. P. 31 3 LABEL PRINTING • Printing a label. P. 41 • Setting Margin. P.
To prevent injury and damage, important notes are explained using various symbols. The symbols and their meanings are as follows: Indicates a potentially hazardous situation which, if not avoided, z INTRODUCTION Safety Precautions WARNING could result in death or serious injuries. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries. The symbols used in this manual are as follows: Action NOT allowed DO NOT disassemble the product.
INTRODUCTION WARNING Battery Follow these guidelines to avoid liquid leakage, heat, rupture of the battery and cause personal injury. DO NOT throw into fire, heat up, short-circuit, recharge, or disassemble the battery. AC adapter Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of injury. Always use the specified voltage (120V) and the suggested AC adapter. Failure to observe this may result in an accident or damage.
Battery Follow these guidelines to avoid liquid leakage, heat or rupture of the battery . DO NOT use old and new batteries together. DO NOT mix alkaline batteries with other type batteries. DO NOT set the positive and negative end in the wrong position. Remove the batteries if you do not intend to use the P-touch labeler for an extended period of time.
INTRODUCTION General Precautions • DO NOT install this machine near any device that will cause electromagnetic interference.This machine may malfunction if left near a television, radio, etc. • DO NOT use the P-touch labeler in any way or for any purpose not described in this guide. Doing so may result in accidents or damage the machine. • DO NOT put any foreign objects into the tape exit slot, or AC adapter connector , etc. • DO NOT touch the print head with your fingers.
The following symbols are used throughout this guide to indicate additional information. This symbol indicates information or directions that may result in damage or : injury if ignored, or operations that will result in errors. : z INTRODUCTION Symbols Used in this Guide This symbol indicates information or directions that may help you understand and use the P-touch labeler more efficiently.
GETTING STARTED Unpacking Your P-touch labeler Check that the package contains the following before using your P-touch labeler. P-touch labeler PT-2030 Starter Tape Cassette AC adapter (Optional on the PT-2030.) User’s Guide The plug may differ by countries.
z GETTING STARTED Battery compartment cover Battery case AC adaptor connector LCD Display & Keyboard LCD Display 4 5 6 7 8 9 10 1 2 3 1. Line number Indicates line number within the label layout. 2. Cursor Characters are entered to the left of the cursor. Indicates the current data input position. 3. Return mark Indicates the end of a line of text. 4. Caps mode Indicates that the Caps mode is on. 5.~8.
GETTING STARTED Key Names and Functions The default language is "English". 1. Power Turns the P-touch labeler on and off. 2. Cursor ( ) Moves the cursor in the direction of the arrow. 3. OK Selects the displayed option. 4. Escape Cancels the current command and returns the display to the data entry screen or the previous step. 5. Label Collection Enables label collections to be selected and printed. 12 LCD Display & Keyboard 6. Print • Prints the current label design onto the tape.
16. Shift Use this key in combination with the letter and number keys to type uppercase letters or the symbols indicated on the number keys. 17. Symbol Use this to select and enter a symbol from a list of available symbols. 18. Backspace Deletes the character to the left of the cursor. 19. Enter • Enters a new line when entering text. • Enters a new block when used in combination with the Shift key. 20. Auto-Format Enables labels to be created using predefined templates or block formats. 21.
GETTING STARTED Power Supply Battery 1 After making sure that the power is off, remove the battery compartment cover on the back of the machine. If the batteries are already in the machine, remove them. Make sure that the power is turned off when replacing batteries. 2 Insert six new AA-size alkaline batteries (LR6), making sure that the positive (+) and negative (-) ends of the batteries match the positive (+) and negative (-) marks inside the battery compartment.
z GETTING STARTED AC Adapter (Optional on the PT-2030.) Connect the AC adapter directly to the P-touch labeler. 1 Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V on the P-touch labeler. 2 Insert the AC adapter plug into a standard electrical outlet. • Turn the P-touch labeler off before disconnecting the AC adapter. • Do not pull or bend the AC adapter cord.
GETTING STARTED Inserting a Tape Cassette Tape cassettes of 0.13", 0.23", 0.35", 0.47" or 0.70" (3.5mm, 6mm, 9mm, 12mm or 18mm) width can be used in your P-touch labeler. Use only Brother tape cassettes with the mark. • If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette. • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow as shown on the tape cassette.
z GETTING STARTED 3 Insert the tape cassette into the tape compartment, with the end of the tape facing the machine's tape exit slot, and press firmly until you hear a click. When inserting the tape cassette, make sure that the tape and ink ribbon do not catch on the print head. Tape exit slot 4 Close the tape compartment cover. Make sure that the release lever is up when closing the tape compartment cover. The tape compartment cover cannot be closed if the release lever is pressed down.
GETTING STARTED Feeding Tape Feed function The Feed function feeds 0.98" (25mm) of blank tape. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam. 1 Hold down the Shift key and press the Preview key.
Language 1 Press the Setup key to display the Setup menu, select "Language" using the or key, and then press the OK or Enter key. 2 Select a language for menu commands and messages shown on the LCD display by using the or key. The language can be selected from "Český", "Dansk", "Deutsch", "English", "Español", "Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski", "Português", "Română", "Slovenski", "Slovenský", "Suomi", "Svenska" or "Türkçe". 3 Press the OK or Enter key.
EDITING A LABEL Entering and Editing Text Entering Text from the Keyboard • The keyboard of your P-touch labeler can be used in the same way as a standard computer keyboard. Adding a New Line • To end the current line of text and start a new line, press the Enter key. A return mark appears at the end of the line and the cursor moves to the start of the new line. • There is a maximum number of lines of text that can be entered for each tape width. A maximum of 5 lines for 0.70" (18mm) tape, 3 lines for 0.
Deleting one character at a time • To delete a character from an existing line of text, move the cursor to the character to the right of the position you want to start deleting text and then press the Backspace key. The character to the left of the cursor is deleted each time the Backspace key is pressed. z EDITING A LABEL Deleting Text If you hold down the Backspace key, the characters left of the cursor are deleted continuously.
EDITING A LABEL Entering Symbols In addition to the symbols available on the keyboard, there are various symbols (including international and extended ASCII characters) available with the symbol function. To enter a symbol, use the Symbol function (see below). Alternatively, hold down the Shift key and then press a key on the keyboard to enter the symbol printed on the selected key's upper-right corner. Entering Symbols Using the Symbol Function 1 Press the Symbol key.
z EDITING A LABEL zSymbol Listz Category Punctuation Business Mathematics Brackets Arrows Unit International Number Symbols Pictograph Electrical Audio_Visual Signs Communication Vehicle Sports Nature 1 Others 2 The use of the CE mark is strictly governed by one or more European Council directives. Ensure that any labels you produce which use this mark conform with the relevant directives.
EDITING A LABEL Entering Accented Characters The P-touch labeler can display and print a set of accented characters such as other language specific characters. 1 Enter the character you wish to change to an accented character. Caps mode can be used with the Accent function. 2 Press the Accent key. The character you entered will change to an accented character. 3 Press the Accent key repeatedly until the desired accented character is selected, or select it by using the or key.
Setting Character Attributes by Label Using the Text key, you can select a font and apply size, width, style, line, and alignment attributes. 1 Press the Text key. The current settings are displayed. 2 Select an attribute using the using the or key. 3 Press the OK or Enter key to apply the settings. or z EDITING A LABEL Setting Character Attributes key, and then set a value for that attribute New settings are NOT applied if you do not press the OK or Enter key.
EDITING A LABEL zSetting Optionsz Attribute Value Result HEL (Helsinki) Font BRU (Brussels) FLO (Florida) CAL (Calgary) Auto 42pt 36pt 24pt Size 18pt 12pt 9pt 6pt 26 Setting Character Attributes When Auto is selected, the text is automatically adjusted to print in the largest size available for each tape width.
Value z EDITING A LABEL Attribute Result x2 x1 Width x2/3 x1/2 Normal BLD (Bold) OUT (Outline) SHD (Shadow) SLD (Solid) Style 1 ITL (Italic) 2 I+BLD (Italic Bold) 3 I+OUT (Italic Outline) 4 5 I+SHD (Italic Shadow) 6 I+SLD (Italic Solid) 7 8 VRT (Vertical) 9 Setting Character Attributes 27
EDITING A LABEL Attribute Value Result Off Line UND (Underline) STR (Strikeout) Left Align (Alignment) Center Right Just (Justify) Setting Auto Fit Style When "Size" is set to "Auto" and "Length" is set to a specific length, you can select the way of reducing the text size to fit within the label length. When "Text Size" is selected, the total text size is modified to fit within the label. When "Text Width" is selected, the text width will be reduced to the size of x1/2 setting.
Using the Label key, you can create a label with a frame around the text and specify the label length and tab length. (Refer to “Setting Margin” on page 45.) 1 Press the Label key. The current settings are displayed. 2 Select an attribute using the or a value for that attribute using the z EDITING A LABEL Setting Label Attributes key, and then set or key. • When setting the tab length, hold down the or key to change the value faster.
EDITING A LABEL Attribute Value Result 4 5 6 7 8 9 Frame 10 11 12 13 14 15 16 Length Tab Length 30 Setting Label Attributes The length of the label can be set within the range 1.2" (30mm) 12.0" (300mm). When Auto is selected, the length of the label is automatically adjusted based on the amount of text entered. The length of the tab can be set within the range 0.0" (0mm) 4.0"(100mm). The default setting is 2.0" (50mm).
Using the Auto-Format function you can quickly and easily create labels for a variety of purposes, such as file tabs, equipment labels, name badges, etc. Simply select a layout from the templates or block layouts, enter the text and apply formatting as desired. Symbols and accented characters can also be used in auto-format layouts.
EDITING A LABEL 9 Enter the text and then press the OK or Enter key. Repeat this for each text field. After all text fields are entered, the print menu is displayed when the OK or Enter key is pressed. 10 Select "Print" using the the label. • • • • or key and then press the OK or Enter key to print Select "Edit" to change the text data or style settings. Select "Save" to store the label in a file memory. Select "Cancel" to exit the Auto-Format function.
Value Details Bin Box (0.70" x 3.0" [18 mm x 76 mm]) z EDITING A LABEL Attribute Equipment Label (0.70" x 2.2" [18 mm x 58 mm]) Faceplate (VRT) (0.47" x 2.7" [12 mm x 70 mm]) Cable Wrap (0.70" x 1.5" [18 mm x 39 mm]) Address Label (0.70" x 2.7" [18 mm x 70 mm]) Template Name Name Badge 1 (0.70" x 2.8" [18 mm x 72 mm]) 1 Name Badge 2 (0.47" x 2.8" [12 mm x 72 mm]) 2 3 CD Case Spine 1 (0.23" x 4.4" [6 mm x 113 mm]) CD Case Spine 2 (0.13" x 4.4" [3.5 mm x 113 mm]) VHS Spine (0.70" x 5.
EDITING A LABEL Using Block Layouts 1 Press the Auto-Format key to display the Auto-Format screen, and then select “Block Layouts” using the or key. 2 Press the OK or Enter key to display the Tape Width screen, and then select a tape width using the or key. 3 Press the OK or Enter key. When the tape width has not changed, the last block layout selected is displayed. When the tape width has changed, the default layout for the new tape width is displayed.
• If the width of the current tape cassette does not match the set width for the selected layout, an error message is displayed when you try to print the label. Press the Escape key or any other key to clear the error message, and insert a tape cassette of the correct width. • If the number of characters entered exceeds the limit, “Text Too Long!” is displayed when the OK or Enter key is pressed. Press the Escape key or any other key to clear the error message, and edit the text using fewer characters.
EDITING A LABEL Attribute Value 2LineA Block layout (0.47" [12 mm] tape) 2LineB 3Line 1+2Line 2LineA Block layout (0.35" [9 mm] tape) 2LineB 1+2Line Block layout (0.
Using the Bar Code function you can create labels with one dimensional bar codes for use with cash registers, stock control systems or other bar code reader systems, or even asset control tags used in an asset management system. • The P-touch labeler is not designed exclusively for creating bar code labels. Always check that bar code labels can be read by the bar code reader. • For best results, print bar code labels in black ink on white tape.
EDITING A LABEL zBar Code Settingsz Attribute Protocol Value CODE39, CODE128, EAN-8, EAN-13, GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF), CODABAR Small Width Large Under# (characters printed below bar code) On Off Off C.Digit (check digit) On (only available for the CODE39, I-2/5 and CODABAR protocols) Entering Bar Code Data 1 Press the Bar Code key. The Bar Code Input screen is displayed. Up to five bar codes can be entered on a label. 38 2 Type in the bar code data.
zSpecial Character Listz CODE39 Code 0 1 2 3 4 5 6 Special Character (SPACE) CODABAR Code 0 1 2 3 4 5 Special Character z EDITING A LABEL • Press the Escape key to return to the previous step. • Refer to the Special Characters List table for a list of all available settings.
EDITING A LABEL CODE128, GS1-128 (UCC / EAN-128) Code Special Character Code Special Character Code Special Character 0 (SPACE) 24 48 DC3 1 25 49 DC4 2 26 50 NAK 3 27 51 SYN 4 28 NUL 52 ETB 5 29 53 CAN 6 30 SOH 54 EM 7 31 STX 55 SUB 8 32 ETX 56 ESC 9 33 EOT 57 10 34 ENQ 58 FS 11 35 ACK 59 12 36 BEL 60 GS 13 37 BS 61 14 38 HT 62 RS 15 39 LF 63 16 40 VT 64 US 17 41 FF 65 DEL 18 42 CR 66 FNC3 19 43 SO 67 FNC2 20 44 SI 68 FNC4 21 45 DLE 69 FNC1 22 46 DC1 23 47 DC2 Editing and Deleting a Bar Code • To edit the
LABEL PRINTING Using the Preview function you can check the layout of the label before printing. 1 Press the Preview key. An image of the label is displayed on the screen. The length of the label is shown in the lower-right corner of the screen. Press the or key to scroll the preview to the left or right. Press the or key to change the magnification of the preview. z LABEL PRINTING Label Preview • Press the Escape, OK or Enter key to return to the text entry screen.
LABEL PRINTING Printing a Single Copy 1 Make sure that the appropriate tape cassette is inserted and ready for printing. 2 Press the Print key. "Printing...Copies" is displayed while the labels are being printed. To stop printing, press the Power key to turn off the P-touch labeler. There are several other messages that may appear when you press the Print key. Refer to “Error Messages” on page 56 for further information about error messages.
Using the numbering function you can create a set of sequentially numbered labels from a single label format. 1 Make sure that the appropriate tape cassette is inserted and ready for printing. 2 Hold down the Shift key and press the Print key to display the print options screen, and then select "Numbering" using the or key. 3 Press the OK or Enter key. The numbering start point screen is displayed.
LABEL PRINTING • Letters and numbers increase as shown below: Î 1 ...9 Î 0 Î ... 0 ...Z Î A Î ... A Î B Î b ...z Î a Î ... a A0 Î A1 ...A9 Î B0 Î ... Spaces (shown as underscores “_” in the example below) can be used to adjust the spacing between characters or to control the number of digits that are printed. _9 Î 10 ...99 Î 00 Î ... _Z Î AA ...ZZ Î AA Î ... 1_9 Î 2_0 ...9_9Î 0_0 Î ...
The tape cutting options allow you to specify how the tape is fed and cut when printing labels. In particular, the “Chain” options greatly reduce the amount of wasted tape by using smaller margins and eliminating blank sections cut between labels. 1 Press the Label key to display the Label menu. 2 Select "Margin" using the key. 3 Press the OK or Enter key to apply the settings.
LABEL PRINTING Setting Chain Description • Use this setting when printing several labels with minimum margins. • Feed the tape before using the cutter. Otherwise a part of the text may be cut off. Do not try to pull the tape since this may damage the tape cassette. • After pressing Print, “OK to Feed?” appears. Press the Escape key to enter more texts or press the OK or Enter key to feed. • The final label is printed with an 0.37" (9.4 mm) margin to the right of the characters.
z LABEL PRINTING • The backing of some types of tapes may be pre-cut to make it easier to peel the backing.To remove the backing, simply fold the label lengthwise with the text facing inward, to expose the inside edges of the backing. Next, peel off the backing one piece at a time. • Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.
LABEL PRINTING zLabel Collection Listz Category Files (0.47" [12 mm] tape only) Office Signage (0.70" [18 mm] tape only) * Labels are for illustrative purposes only.
z LABEL PRINTING Category Label Caution (0.70" [18 mm] tape only) Shipping (0.70" [18 mm] tape only) ECO (0.70" [18 mm] tape only) 1 2 3 4 5 * Labels are for illustrative purposes only.
LABEL PRINTING Category Retail (0.70" [18 mm] tape only) Personal (0.47" [12 mm] tape only) * Labels are for illustrative purposes only.
USING THE FILE MEMORY • When the file memory is full, each time you save a file you will need to overwrite one of your stored files. Storing a Label into Memory 1 After entering the text and formatting the label, press the File key to display the File screen. 2 Select "Save" using the 3 Press the OK or Enter key. A file number is displayed. A label text is also displayed if a label is already stored in that file number.
USING THE FILE MEMORY Printing a Stored Label File 1 Press the File key to display the File screen. 2 Select "Print" using the 3 Press the OK or Enter key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the Print, OK or Enter key to print the selected label. The label is printed from the machine. or key. • Press the Escape key to return to the previous step.
MAINTAINING YOUR P-TOUCH LABELER You can reset the internal memory of your P-touch labeler when you want to clear all saved label files, or in the event the P-touch labeler is not operating correctly. Resetting the data to factory settings (Label collections stored in Favorites is not reset.) Turn off the machine. Press and hold down the Shift and R keys. While holding down the Shift and R keys, press the Power key once and then release the Shift and R keys.
MAINTAINING YOUR P-TOUCH LABELER Cleaning the Tape Cutter Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade which may result in the tape jamming in the cutter. • About once every year, wipe the cutter blade using a cotton swab moistened with Isopropyl alcohol (rubbing alcohol). • Do not touch the cutter blade directly with your bare hands.
TROUBLESHOOTING Problem The screen ‘locks’, or the P-touch labeler does not respond normally. Solution Refer to “Resetting the P-touch Labeler” on page 53 and reset the internal memory to the initial settings. If resetting the P-touch labeler does not solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
TROUBLESHOOTING Error Messages When an error message appears on the display, follow the directions provided below. Message Battery Weak! * The installed batteries are getting weak. Cause/Remedy Check Battery! The installed batteries are about to run out of power. Replace with new batteries or connect the AC adapter before continuing. Wrong Type Of Adapter Connected! An incompatible AC adapter is connected.
Cause/Remedy An 0.70" (18 mm) tape cassette is not installed when an Auto-Format for 0.70" (18 mm) tape is selected. Install an 0.70" (18 mm) tape cassette. Insert 18mm Tape Cassette! * Insert 0.47" Tape Cassette! * z TROUBLESHOOTING Message Insert 0.70" Tape Cassette! * An 0.47" (12 mm) tape cassette is not installed when an Auto-Format for 0.47" (12 mm) tape is selected. Install a 0.47" (12 mm) tape cassette. Insert 12mm Tape Cassette! * Insert 0.35" Tape Cassette! * An 0.
TROUBLESHOOTING Message Select Other Margin! * Text Too Long! * Text Too High! * Cause/Remedy The tape length set using the tape length setting is shorter than the total length of the left and right margins applied for the "Large Margin" setting. Select a different margin setting. The length of the label to be printed using the text entered is longer than the length setting. Edit the text to fit within the set length or change the length setting. The text size is too large. Select a different size option.
APPENDIX z APPENDIX Specifications Main Unit Item Display Character display Screen contrast Printing Print method Print head Print height Print speed Tape cassette No. of lines Margin Memory Memory buffer size File storage Other Features Templates Power Supply Power supply Auto Power-off Size Dimensions Weight Other Operating temperature / humidity Specification 16 characters x 1 guidance and 2 lines text (128 dot x 48 dot) 5 levels (+2, +1, 0, -1, -2) Thermal Transfer 112 dot / 180 dpi 0.62" (15.
INDEX A R AC adapter ........................................15 Accented Character List ....................24 Auto power-off time ...........................17 Return mark ......................................11 B Battery ...............................................14 Block Layouts ....................................35 C Caps mode ........................................11 contrast .............................................18 cursor keys ........................................20 size .......
Contact Information (For USA Only) Service Center Locations If you need a local service center, please call 1-877-BROTHER (1-877-276-8437) to locate the authorized service center closest to you. Note: Be sure to call the Service Center before your visit. Service centers do not provide operational assistance. See "Operational Assistance".
Printed in China LW6937001